Specification sheet Wheel Loader Ref case-721f-wheel-loader
Case 721F
The Case 721F is a wheel loader with an operating weight of 31,508 lb (14,291.79 kg), a 178.4 hp engine, and a 3.26 yd³ (2.5 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
31,508lb
14,291.79kg
Engine power
178.4hp
133kW
Net Power Bucket capacity
3.26yd³
2.5m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Case 721F sits in the middle of its class:
- Operating weight 31,510 lb heavier than 54% (n=439)
- Engine power 178 hp more powerful than 63% (n=408)
- Bucket capacity 3.3 yd³ larger-bucket than 51% (n=387)
◇Scale drawingdrawn to scale · mm
01 Hydraulic Cycle Times (Unloaded) Specification
| Total Cycle Time | 8.9sec |
|---|
02 Engine Specification
| Emissions Level | Tier 4 | |
|---|---|---|
| Engine Speed - Rated Speed, Full Load | 2000rpm | |
| Number Of Cylinders | 6 | |
| Max. Torque Iso14396 | 700.7lb ft | 950Nm |
| Engine Model | FPT F4HFE613T | |
| Net Power | 178.4hp | 133kw |
| Gross Power | 194.5hp | 145kw |
| Power Measured @ | 2000rpm | |
| Max Torque | 674lb ft | 913.9Nm |
| Displacement | 411cu in | 6.8L |
| Torque Measured @ | 1300rpm | |
| Aspiration | Turbocharged | |
| Torque Rise | 37% | |
| Alternator | 120amps |
03 Operational Specification
| Operating Weight | 31508lb | 14291.8kg |
|---|---|---|
| Fuel Capacity | 65gal | 246.1L |
| Hydraulic System Fluid Capacity | 47gal | 178L |
| Engine Oil Fluid Capacity | 4gal | 15.1L |
| Cooling System Fluid Capacity | 7.6gal | 28.4L |
| Transmission Fluid Capacity | 9gal | 34L |
| Front Axle/Diff Fluid Capacity | 9.3gal | 35L |
| Rear Axle/Diff Fluid Capacity | 6.1gal | 23L |
| Static Tipping Weight | 23371.3lb | 10601kg |
| Turning Radius | 18.9ft in | 5750mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 65amps | |
| Rear Axle Oscillation | 24degrees |
04 Transmission Specification
| Differential Lock | F: LSD / R: LSD | |
|---|---|---|
| Transmission Type | Powershift | |
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 23.5mph | 37.9km/h |
| Max Speed - Reverse | 15.9mph | 25.6km/h |
05 Hydraulic System Specification
| Steering Pump Type | Articulation | |
|---|---|---|
| Maximum System Pressure | 3625psi | 24993.5kPa |
| Relief Valve Setting | 3625psi | 24993.5kPa |
| Pump Flow Capacity | 31.8gal/min | 120L/min |
| Raise Time | 5.2sec | |
| Dump Time | 1.2sec | |
| Lower Time | 2.4sec | |
| Pump Type | Axial Piston Pump |
06 Brakes Specification
| Service Brake | Wet Multi Disc |
|---|
07 Bucket Dimensions
| Dump Clearance At Max Raise | 9.62ft in | 2930mm |
|---|---|---|
| Breakout Force | 31360.85lb | 139.5kN |
| Bucket Capacity - Heaped | 3.26yd3 | 2.5m3 |
| Bucket Capacity - Struck | 2.76yd3 | 2.12m3 |
| Bucket Width | 8.86ft in | 2700mm |
08 Dimensions Dimensions
| Ground Clearance | 1.2ft in | 365mm |
|---|---|---|
| Length With Bucket On Ground | 25.1ft in | 7648mm |
| Width Over Tires | 8.71ft in | 2653mm |
| Height To Top Of Cab | 11.11ft in | 3385mm |
| Wheelbase | 10.68ft in | 3253mm |
| Hinge Pin - Max Height | 13.06ft in | 3979mm |
| Reach At Max Lift And Dump | 5.44ft in | 1658mm |
| Dump Reach @ Full Height, 45° Dump: Bucket | 3.7ft in | 1.13m |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.