Specification sheet Wheel Loader Ref case-721b-wheel-loader
Case 721B
The Case 721B is a wheel loader with an operating weight of 29,762.41 lb (13,500 kg), a 136.6 hp engine, and a 2.75 yd³ (2.1 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
29,762.41lb
13,500kg
Engine power
136.6hp
101.8kW
Net Power Bucket capacity
2.75yd³
2.1m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Case 721B sits in the middle of its class:
- Operating weight 29,760 lb lighter than 56% (n=439)
- Engine power 137 hp less powerful than 76% (n=408)
- Bucket capacity 2.8 yd³ smaller-bucket than 70% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Max Torque Iso Tr14396 | 458.1lb ft | 621Nm |
| Engine Model | 6T-830 | |
| Engine Type | 4 stroke Direct injection | |
| Net Power | 136.6hp | 101.8kw |
| Gross Power | 151.6hp | 113kw |
| Power Measured @ | 2100rpm | |
| Torque Measured @ | 1500rpm | |
| Aspiration | Turbocharged | |
| Fuel Type | Diesel | |
| Bore | 4.5in | 114mm |
| Stroke | 5.4in | 135mm |
02 Operational Specification
| Operating Weight | 29762.5lb | 13500kg |
|---|---|---|
| Fuel Capacity | 53.9gal | 204L |
| Hydraulic System Fluid Capacity | 40.5gal | 153L |
| Engine Oil Fluid Capacity | 5.6gal | 21L |
| Front Axle/Diff Fluid Capacity | 4gal | 15L |
| Rear Axle/Diff Fluid Capacity | 2.6gal | 9.5L |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 65amps |
03 Transmission Specification
| Transmission Type | Mechanical | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 22.2mph | 35.7km/h |
| Max Speed - Reverse | 14.2mph | 22.9km/h |
04 Hydraulic System Specification
| Pump Flow Capacity | 57.6gal/min | 218L/min |
|---|---|---|
| Raise Time | 5.9sec | |
| Dump Time | 1.8sec | |
| Lower Time | 4.6sec | |
| Pump Type | Hydraulic tandem pump |
05 Bucket Dimensions
| Bucket Capacity - Heaped | 2.75yd3 | 2.1m3 |
|---|---|---|
| Bucket Capacity - Struck | 2.36yd3 | 1.8m3 |
| Bucket Width | 8.21ft in | 2500mm |
| Breakout Force | 27629.02lb | 122.9kN |
06 Dimensions Dimensions
| Ground Clearance | 1.38ft in | 420mm |
|---|---|---|
| Length With Bucket On Ground | 22.81ft in | 6950mm |
| Width Over Tires | 7.94ft in | 2420mm |
| Height To Top Of Cab | 10.67ft in | 3250mm |
| Wheelbase | 9.52ft in | 2900mm |
| Hinge Pin - Max Height | 12.11ft in | 3690mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.