Specification sheet Wheel Loader Ref case-621c-xt-wheel-loader

Case 621C XT

The Case 621C XT is a wheel loader with an operating weight of 28,810.01 lb (13,068 kg), a 130.1 hp engine, and a 2.36 yd³ (1.8 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
28,810.01lb
13,068kg
Engine power
130.1hp
97.1kW
Net Power
Bucket capacity
2.36yd³
1.8m³

Where it sits in its classpercentile · small wheel loaders

Among 439 small wheel loaders (22,000–45,000 lb), the Case 621C XT sits in the middle of its class:

  • Operating weight 28,810 lb lighter than 60% (n=439)
  • Engine power 130 hp less powerful than 82% (n=408)
  • Bucket capacity 2.4 yd³ smaller-bucket than 88% (n=387)

Scale drawingdrawn to scale · mm

3260A2430C
Front elevation

01 Engine Specification

Number Of Cylinders 6
Engine Model 6T-590
Compression Ratio 17.5:1
Net Power 130.1hp 97.1kw
Torque 424.8lb ft 575.9Nm
Gross Power 139.5hp 104kw
Power Measured @ 2000rpm
Displacement 359.1cu in 5.9L
Torque Measured @ 1400rpm
Aspiration Turbocharged
Torque Rise 31%
Bore 4.1in 102mm
Stroke 4.8in 120mm

02 Operational Specification

Operating Weight 28810.1lb 13068kg
Fuel Capacity 51gal 193L
Hydraulic System Fluid Capacity 40.5gal 153L
Engine Oil Fluid Capacity 4gal 15.1L
Cooling System Fluid Capacity 6.9gal 26.1L
Transmission Fluid Capacity 2gal 7.4L
Front Axle/Diff Fluid Capacity 2.6gal 9.5L
Rear Axle/Diff Fluid Capacity 2.6gal 9.5L
Turning Radius 17.1ft in 5190mm
Operating Voltage 12V
Alternator Supplied Amperage 65amps
Tire Size 20.5 R25

03 Transmission Specification

Transmission Type Mechanical w/ electronic control
Number Of Forward Gears 4
Number Of Reverse Gears 3

04 Hydraulic System Specification

Pump Flow Capacity 61.6gal/min 233.1L/min
Raise Time 5.4sec
Dump Time 1.7sec
Lower Time 4.4sec

05 Bucket Dimensions

Breakout Force 27808.87lb 123.7kN
Bucket Capacity - Heaped 2.36yd3 1.8m3
Bucket Capacity - Struck 1.97yd3 1.5m3
Bucket Width 8.34ft in 2540mm

06 Dimensions Dimensions

Ground Clearance 1.4ft in 425mm
Width Over Tires 7.98ft in 2430mm
Height To Top Of Cab 10.7ft in 3260mm
Wheelbase 9.52ft in 2900mm
Hinge Pin - Max Height 12.7ft in 3870mm
Transport Height- Maximum 10695.54ft in 3260m
Transport Length, Maximum 23654.86ft in 7210m
Transport Width 8333.34ft in 2540m

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.