Specification sheet Wheel Loader Ref case-621bxt-wheel-loader

Case 621BXT

The Case 621BXT is a wheel loader with an operating weight of 58,177.79 lb (26,389 kg), a 126 hp engine, and a 2.97 yd³ (2.27 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
58,177.79lb
26,389kg
Engine power
126hp
94kW
Net Power
Bucket capacity
2.97yd³
2.27m³

Where it sits in its classpercentile · medium wheel loaders

Among 198 medium wheel loaders (45,000–90,000 lb), the Case 621BXT sits above the median for its class:

  • Operating weight 58,180 lb heavier than 66% (n=198)
  • Engine power 126 hp less powerful than 100% (n=190)
  • Bucket capacity 3 yd³ smaller-bucket than 100% (n=174)

Scale drawingdrawn to scale · mm

3292A2438B
Front elevation

01 Engine Specification

Engine Model 6T 590
Net Power 126hp 94kw
Gross Power 138hp 103kw
Power Measured @ 2200rpm
Max Torque 443lb ft 600.7Nm
Displacement 3.6cu in 0.1L
Torque Measured @ 1400rpm
Bore 4.1in 102.2mm
Stroke 4.8in 119.9mm

02 Operational Specification

Operating Weight 58177.8lb 26389kg
Fuel Capacity 51gal 193.1L
Engine Oil Fluid Capacity 3.8gal 14.2L
Cooling System Fluid Capacity 7gal 26.5L
Transmission Fluid Capacity 5gal 19L
Front Axle/Diff Fluid Capacity 5.5gal 20.9L
Rear Axle/Diff Fluid Capacity 5.5gal 20.9L

03 Transmission Specification

Number Of Forward Gears 4
Number Of Reverse Gears 3
Max Speed - Forward 20.6mph 33.2km/h
Max Speed - Reverse 15mph 24.2km/h

04 Hydraulic System Specification

Implement Pump Flow Ps 56.4gal/min 213.5L/min
Steering System Relief Valve Setting 2550psi 17581.7kPa
Raise Time 5.7sec
Dump Time 1.7sec
Lower Time 5sec

05 Bucket Dimensions

Dump Clearance At Max Raise 9.9ft in 3017.52mm
Bucket Capacity - Heaped 2.97yd3 2.27m3
Bucket Capacity - Struck 2.54yd3 1.94m3
Bucket Width 8.59ft in 2616.2mm

06 Dimensions Dimensions

Width Over Tires 8ft in 2438.4mm
Height To Top Of Cab 10.8ft in 3291.84mm
Wheelbase 9.5ft in 2895.6mm
Hinge Pin - Max Height 12.8ft in 3901.44mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.