Specification sheet Wheel Loader Ref case-321f-wheel-loader
Case 321F
The Case 321F is a wheel loader with an operating weight of 13,302.7 lb (6,034 kg), a 70 hp engine, and a 1.31 yd³ (1 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
13,302.7lb
6,034kg
Engine power
70hp
52.2kW
Net Power Bucket capacity
1.31yd³
1m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Case 321F sits in the middle of its class:
- Operating weight 13,300 lb heavier than 58% (n=374)
- Engine power 70 hp less powerful than 52% (n=367)
- Bucket capacity 1.3 yd³ smaller-bucket than 56% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Emissions Certification | Final Tier 4 | |
|---|---|---|
| Fuel | Diesel | |
| Fuel Injection | High pressure, common rail injection | |
| Radiator Core Type | All aluminium | |
| Air Filter Type | Dry type element with warning restriction indicator | |
| Number Of Cylinders | 4 | |
| Engine Model | FPT F5H FL463 A F001 | |
| Engine Type | 4-stroke | |
| Net Power | 70hp | 52.2kw |
| Gross Power | 74hp | 55.2kw |
| Power Measured @ | 2500rpm | |
| Max Torque | Gross - 316 Nm, 233 lb ft, Net - 308 Nm, 227 lb ft | |
| Displacement | 207cu in | 3.4L |
| Torque Measured @ | 1400rpm | |
| Bore | 3.9in | 99.1mm |
| Stroke | 4.3in | 109.3mm |
02 Operational Specification
| Operating Weight | 13302.7lb | 6034kg |
|---|---|---|
| Fuel Capacity | 22.8gal | 86L |
| Hydraulic System Fluid Capacity | 14.1gal | 53L |
| Engine Oil Fluid Capacity | 1.9gal | 7L |
| Cooling System Fluid Capacity | 3.5gal | 13L |
| Front Axle/Diff Fluid Capacity | 2.3gal | 8.7L |
| Rear Axle/Diff Fluid Capacity | 2.7gal | 10L |
03 Electrical Specification
| Voltage | 12V | |
|---|---|---|
| Alternator | 120amps | |
| Batteries | 95 AHR, 900 CCA |
04 Transmission Specification
| Transmission Type | Hydrostatic transmission | |
|---|---|---|
| Number Of Forward Gears | 2 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 12.5mph | 20km/h |
| Max Speed - Reverse | 12.5mph | 20km/h |
05 Hydraulic System Specification
| Standard Pressure | 3626psi | 25000.4kPa |
|---|---|---|
| Pump Flow Capacity | 22.5gal/min | 85L/min |
| Pump Type | Gear |
06 Bucket Dimensions
| Dump Clearance At Max Raise | 3.3ft in | 1003mm |
|---|---|---|
| Breakout Force | 10071.44lb | 44.8kN |
| Bucket Capacity - Heaped | 1.31yd3 | 1m3 |
07 Dimensions Dimensions
| Ground Clearance | 1.62ft in | 493mm |
|---|---|---|
| Length With Bucket On Ground | 19.53ft in | 5952mm |
| Width Over Tires | 6.11ft in | 1860mm |
| Height To Top Of Cab | 8.8ft in | 2680mm |
| Wheelbase | 7.3ft in | 2225mm |
| Hinge Pin - Max Height | 11.14ft in | 3395mm |
| Reach At Max Lift And Dump | 3.3ft in | 1003mm |
| Angle Of Departure | 32degrees |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.