Specification sheet Wheel Loader Ref case-321e-wheel-loader
Case 321E
The Case 321E is a wheel loader with an operating weight of 12,676 lb (5,896 kg), a 72 hp engine, and a 1.44 yd³ (1.11 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
12,676lb
5,896kg
Engine power
72hp
53.5kW
Net Power Bucket capacity
1.44yd³
1.11m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Case 321E sits in the middle of its class:
- Operating weight 12,680 lb heavier than 51% (n=374)
- Engine power 72 hp more powerful than 50% (n=367)
- Bucket capacity 1.4 yd³ larger-bucket than 52% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2349 | |
| Engine Model | BF4M2011 tier 2 certified | |
| Net Power | 72hp | 53.5kw |
| Gross Power | 75hp | 56kw |
| Power Measured @ | 2300rpm | |
| Max Torque | 195lb ft | 265Nm |
| Displacement | 190cu in | 3.2L |
| Torque Measured @ | 1600rpm | |
| Torque Rise | 9% |
02 Operational Specification
| Operating Weight | 12676lb | 5896kg |
|---|---|---|
| Fuel Capacity | 26.4gal | 100L |
| Hydraulic System Fluid Capacity | 19.5gal | 74L |
| Engine Oil Fluid Capacity | 2.7gal | 10L |
| Front Axle/Diff Fluid Capacity | 2.2gal | 8L |
| Rear Axle/Diff Fluid Capacity | 2.2gal | 8L |
| Static Tipping Weight | 9744lb | 4420kg |
| Turning Radius | 13.6ft in | 4132mm |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 55amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 405/70 R20 |
03 Transmission Specification
| Transmission Type | Hydrostatic | |
|---|---|---|
| Number Of Forward Gears | 2 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 12.4mph | 20km/h |
| Max Speed - Reverse | 12.4mph | 20km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3626psi | 25000kPa |
|---|---|---|
| Pump Flow Capacity | 19.3gal/min | 73L/min |
| Raise Time | 6sec | |
| Dump Time | 1sec | |
| Lower Time | 3sec | |
| Pump Type | open centered pressure/flow compensated |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.65ft in | 2635mm |
|---|---|---|
| Bucket Capacity - Heaped | 1.44yd3 | 1.11m3 |
| Bucket Capacity - Struck | 1.18yd3 | 0.91m3 |
| Bucket Width | 6.89ft in | 2100mm |
| Breakout Force | 11241lb | 50kN |
06 Dimensions Dimensions
| Ground Clearance | 1.08ft in | 330mm |
|---|---|---|
| Length With Bucket On Ground | 18.88ft in | 5755mm |
| Width Over Tires | 6.49ft in | 1978mm |
| Height To Top Of Cab | 9.14ft in | 2785mm |
| Wheelbase | 7.71ft in | 2350mm |
| Hinge Pin - Max Height | 11.35ft in | 3459mm |
| Reach At Max Lift And Dump | 2.92ft in | 888mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.