Specification sheet Wheel Loader Ref case-221d-wheel-loader
Case 221D
The Case 221D is a wheel loader with an operating weight of 11,793 lb (5,349.22 kg), a 57.5 hp engine, and a 1.31 yd³ (1 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
11,793lb
5,349.22kg
Engine power
57.5hp
42.9kW
Net Power Bucket capacity
1.31yd³
1m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Case 221D sits in the middle of its class:
- Operating weight 11,790 lb lighter than 56% (n=374)
- Engine power 58 hp less powerful than 69% (n=367)
- Bucket capacity 1.3 yd³ smaller-bucket than 56% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2349 | |
| Engine Model | F4M2011 | |
| Net Power | 57.5hp | 42.9kw |
| Gross Power | 60.5hp | 45.2kw |
| Power Measured @ | 2500rpm | |
| Max Torque | 136lb ft | 184.4Nm |
| Displacement | 190cu in | 3.2L |
| Torque Measured @ | 1700rpm | |
| Torque Rise | 9% |
02 Operational Specification
| Operating Weight | 11793lb | 5349.3kg |
|---|---|---|
| Fuel Capacity | 26.4gal | 100L |
| Hydraulic System Fluid Capacity | 4.1gal | 15.5L |
| Engine Oil Fluid Capacity | 2.3gal | 8.5L |
| Cooling System Fluid Capacity | 3.2gal | 12L |
| Front Axle/Diff Fluid Capacity | 1gal | 3.7L |
| Rear Axle/Diff Fluid Capacity | 1gal | 3.7L |
| Static Tipping Weight | 8873.7lb | 4025kg |
| Turning Radius | 13ft in | 3961mm |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 55amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 365/80 R20 |
03 Transmission Specification
| Transmission Type | hydrostatic | |
|---|---|---|
| Number Of Forward Gears | 2 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 12.4mph | 20km/h |
| Max Speed - Reverse | 12.4mph | 20km/h |
04 Hydraulic System Specification
| Pump Flow Capacity | 17.4gal/min | 65.9L/min |
|---|---|---|
| Raise Time | 5.5sec | |
| Dump Time | 1.1sec | |
| Lower Time | 3sec | |
| Pump Type | open-centered pressure/flow compensated |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.22ft in | 2503mm |
|---|---|---|
| Bucket Capacity - Heaped | 1.31yd3 | 1m3 |
| Bucket Capacity - Struck | 1.09yd3 | 0.83m3 |
| Bucket Width | 6.89ft in | 2100mm |
| Breakout Force | 12182lb | 12182- |
06 Dimensions Dimensions
| Ground Clearance | 1.19ft in | 360mm |
|---|---|---|
| Length With Bucket On Ground | 17.61ft in | 5365mm |
| Width Over Tires | 6.25ft in | 1904mm |
| Height To Top Of Cab | 9.17ft in | 2793mm |
| Wheelbase | 7.39ft in | 2250mm |
| Hinge Pin - Max Height | 10.44ft in | 3182mm |
| Reach At Max Lift And Dump | 2.59ft in | 789mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.