Specification sheet Wheel Loader Ref case-21f-wheel-loader
Case 21F
The Case 21F is a wheel loader with an operating weight of 11,272.24 lb (5,113 kg), a 55 hp engine, and a 0.92 yd³ (0.7 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
11,272.24lb
5,113kg
Engine power
55hp
41.1kW
Net Power Bucket capacity
0.92yd³
0.7m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Case 21F sits in the middle of its class:
- Operating weight 11,270 lb lighter than 59% (n=374)
- Engine power 55 hp less powerful than 74% (n=367)
- Bucket capacity 0.9 yd³ smaller-bucket than 84% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Emissions Certification | Final Tier 4 | |
|---|---|---|
| Fuel | Diesel | |
| Fuel Injection | High pressure, common rail injection | |
| Radiator Core Type | All aluminium | |
| Air Filter Type | Dry type element with warning restriction indicator | |
| Number Of Cylinders | 4 | |
| Engine Model | FPT F5H FL463 B F001 | |
| Engine Type | 4-stroke | |
| Net Power | 55hp | 41.1kw |
| Gross Power | 58hp | 43.3kw |
| Power Measured @ | 2500rpm | |
| Max Torque | 245 Nm, 181 lb ft | |
| Displacement | 207cu in | 3.4L |
| Torque Measured @ | 1400rpm | |
| Bore | 3.9in | 99.1mm |
| Stroke | 4.3in | 109.3mm |
02 Operational Specification
| Operating Weight | 11272.3lb | 5113kg |
|---|---|---|
| Fuel Capacity | 22.8gal | 86L |
| Hydraulic System Fluid Capacity | 14.1gal | 53L |
| Engine Oil Fluid Capacity | 1.9gal | 7L |
| Cooling System Fluid Capacity | 3.5gal | 13L |
| Front Axle/Diff Fluid Capacity | 2.2gal | 8.2L |
| Rear Axle/Diff Fluid Capacity | 2.6gal | 9.5L |
03 Electrical Specification
| Voltage | 12V | |
|---|---|---|
| Alternator | 120amps | |
| Batteries | 95 AHR, 900 CCA |
04 Transmission Specification
| Transmission Type | Hydrostatic transmission | |
|---|---|---|
| Number Of Forward Gears | 2 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 12.5mph | 20km/h |
| Max Speed - Reverse | 12.5mph | 20km/h |
05 Hydraulic System Specification
| Standard Pressure | 3626psi | 25000.4kPa |
|---|---|---|
| Pump Flow Capacity | 17.7gal/min | 67L/min |
| Pump Type | Gear |
06 Bucket Dimensions
| Dump Clearance At Max Raise | 3.14ft in | 957mm |
|---|---|---|
| Breakout Force | 9194.69lb | 40.9kN |
| Bucket Capacity - Heaped | 0.92yd3 | 0.7m3 |
07 Dimensions Dimensions
| Ground Clearance | 1.46ft in | 444mm |
|---|---|---|
| Length With Bucket On Ground | 18.21ft in | 5549mm |
| Width Over Tires | 5.71ft in | 1740mm |
| Height To Top Of Cab | 8.07ft in | 2458mm |
| Wheelbase | 6.81ft in | 2075mm |
| Hinge Pin - Max Height | 10.29ft in | 3136mm |
| Reach At Max Lift And Dump | 3.14ft in | 957mm |
| Angle Of Departure | 28degrees |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.