Specification sheet Wheel Loader Ref case-21d-wheel-loader
Case 21D
The Case 21D is a wheel loader with an operating weight of 9,818 lb (4,453.37 kg), a 51 hp engine, and a 1.05 yd³ (0.8 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
9,818lb
4,453.37kg
Engine power
51hp
38.1kW
Net Power Bucket capacity
1.05yd³
0.8m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Case 21D sits below the median for its class:
- Operating weight 9,820 lb lighter than 76% (n=374)
- Engine power 51 hp less powerful than 78% (n=367)
- Bucket capacity 1.1 yd³ smaller-bucket than 76% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2349 | |
| Engine Model | F4M2011 | |
| Net Power | 51hp | 38.1kw |
| Gross Power | 55hp | 41.1kw |
| Power Measured @ | 2300rpm | |
| Max Torque | 136lb ft | 184.4Nm |
| Displacement | 190cu in | 3.2L |
| Torque Measured @ | 1700rpm | |
| Torque Rise | 6% |
02 Operational Specification
| Operating Weight | 9818lb | 4453.4kg |
|---|---|---|
| Fuel Capacity | 26.4gal | 100L |
| Hydraulic System Fluid Capacity | 15.5gal | 58.7L |
| Engine Oil Fluid Capacity | 2.3gal | 8.5L |
| Cooling System Fluid Capacity | 3.2gal | 12L |
| Front Axle/Diff Fluid Capacity | 1gal | 3.7L |
| Rear Axle/Diff Fluid Capacity | 1gal | 3.7L |
| Static Tipping Weight | 6852lb | 3108kg |
| Turning Radius | 12.3ft in | 3721mm |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 55amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 335/80 R18 |
03 Transmission Specification
| Transmission Type | hydrostatic | |
|---|---|---|
| Number Of Forward Gears | 2 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 11.6mph | 18.7km/h |
| Max Speed - Reverse | 11.6mph | 18.7km/h |
04 Hydraulic System Specification
| Pump Flow Capacity | 13.5gal/min | 51.2L/min |
|---|---|---|
| Raise Time | 6sec | |
| Dump Time | 1sec | |
| Lower Time | 3sec | |
| Pump Type | open-centered pressure/flow compensated |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 7.66ft in | 2334mm |
|---|---|---|
| Bucket Capacity - Heaped | 1.05yd3 | 0.8m3 |
| Bucket Capacity - Struck | 0.87yd3 | 0.66m3 |
| Bucket Width | 6.24ft in | 1900mm |
| Breakout Force | 8968lb | 8968- |
06 Dimensions Dimensions
| Ground Clearance | 1.04ft in | 315mm |
|---|---|---|
| Length With Bucket On Ground | 16.93ft in | 5160mm |
| Width Over Tires | 5.84ft in | 1780mm |
| Height To Top Of Cab | 8.79ft in | 2679mm |
| Wheelbase | 6.95ft in | 2117mm |
| Hinge Pin - Max Height | 10.06ft in | 3065mm |
| Reach At Max Lift And Dump | 2.76ft in | 840mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.