Specification sheet Skid Steer Loader Ref case-1845c-skid-steer-loader

Case 1845C

The Case 1845C is a skid steer loader with an operating weight of 6,186.18 lb (2,806 kg), a 57 hp engine, a rated operating capacity of 1,750.48 lb (794 kg), and a tipping load of 3,545.1 lb (1,608 kg).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
6,186.18lb
2,806kg
Engine power
57hp
42.51kW
Net Power
Rated operating capacity
1,750.48lb
794kg
Tipping load
3,545.1lb
1,608kg
Bucket capacity
0.4yd³
0.3m³

Where it sits in its classpercentile · skid steer loaders

Among 360 skid steer loaders , the Case 1845C sits below the median for its class:

  • Operating weight 6,190 lb lighter than 66% (n=334)
  • Engine power 57 hp less powerful than 61% (n=335)
  • Rated operating capacity 1,750 lb lower-rated than 57% (n=288)

Scale drawingdrawn to scale · mm

2040C203D3360A2570B
Side elevation

01 Engine Specification

Fuel Injection Direct
Number Of Cylinders 4
Engine Make Case
Engine Model 4-390
Gross Power 60hp 44.8kw
Torque 179lb ft 242.7Nm
Net Power 57hp 42.6kw
Power Measured @ 2200rpm
Torque Measured @ 1300rpm
Fuel Type Diesel
Displacement 239.3cu in 4L
Bore 4.1in 102mm
Stroke 4.8in 120mm

02 Operational Specification

Operational Weight 6186.2lb 2806kg
Fuel Capacity 21.6gal 81.4L
Cooling System Fluid Capacity 4.5gal 17L
Engine Oil Fluid Capacity 1.7gal 6.3L
Hydraulic System Fluid Capacity 10.6gal 39.8L
Max Speed 6.1mph 9.7km/h
Chain Box Fluid Capacity - Each Side 1.3gal 4.7L
Tire Size 12.00 x 16.5, 6PR Traction
Operating Voltage 12V
Alternator Supplied Amperage 65amps

03 Loader Specification

Tipping Load 3545.1lb 1608kg
Operating Load Rating 1750.5lb 794kg
Bucket Capacity 0.4yd3 0.3m3
Bucket Width 0.1in 1.6mm

04 Hydraulic Specification

Pump Flow Capacity 16.1gal/min 60.6L/min
Relief Valve Pressure 2300psi 15858kPa
Raise Time 4.3sec
Dump Time 2.9sec
Lower Time 1.4sec

05 Dimensions Dimensions

Length With Bucket 11.03ft in 3360mm
Ground Clearance 8in 203mm
Height To Top Of Cab 6.7ft in 2040mm
Wheelbase 3.38ft in 1030mm
Length W/O Bucket 8.44ft in 2570mm
Reach At Max Lift And Dump 23in 584mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.