Specification sheet Skid Steer Loader Ref case-1838-skid-steer-loader
Case 1838
The Case 1838 is a skid steer loader with an operating weight of 5,216.14 lb (2,366 kg), a 46 hp engine, and a rated operating capacity of 1,324.98 lb (601 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
5,216.14lb
2,366kg
Engine power
46hp
34.31kW
Net Power Rated operating capacity
1,324.98lb
601kg
◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the Case 1838 sits below the median for its class:
- Operating weight 5,220 lb lighter than 84% (n=334)
- Engine power 46 hp less powerful than 82% (n=335)
- Rated operating capacity 1,320 lb lower-rated than 85% (n=288)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | Kubota | |
| Engine Model | V2203DI-B | |
| Gross Power | 49hp | 36.6kw |
| Net Power | 46hp | 34.4kw |
| Power Measured @ | 2800rpm | |
| Max Torque | 114.4lb ft | 155Nm |
| Torque Measured @ | 1700rpm | |
| Displacement | 134.3cu in | 2.2L |
| Bore | 3.5in | 87mm |
| Stroke | 3.7in | 92.5mm |
02 Operational Specification
| Operational Weight | 5216.2lb | 2366kg |
|---|---|---|
| Fuel Capacity | 19.5gal | 73.8L |
| Cooling System Fluid Capacity | 2.1gal | 7.6L |
| Hydraulic System Fluid Capacity | 15.8gal | 59.8L |
| Max Speed | 6.5mph | 10.5km/h |
| Chain Box Fluid Capacity - Each Side | 1.3gal | 4.7L |
| Tire Size | 10.00 x 16.5 | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 40amps |
03 Loader Specification
| Tipping Load (Iso 14397) | 2650lb | 1202kg |
|---|---|---|
| Operating Load Rating | 1325lb | 601kg |
04 Hydraulic Specification
| Pump Type | Gear pump driven directl | |
|---|---|---|
| Pump Flow Capacity | 15.8gal/min | 59.8L/min |
| Relief Valve Pressure | 2300psi | 15858kPa |
| Raise Time | 4.2sec | |
| Dump Time | 2.8sec | |
| Lower Time | 2.5sec |
05 Dimensions Dimensions
| Length With Bucket | 10.44ft in | 3180mm |
|---|---|---|
| Width Over Tires | 4.99ft in | 1520mm |
| Ground Clearance | 6.7in | 170mm |
| Wheelbase | 3.09ft in | 940mm |
| Length W/O Bucket | 8.04ft in | 2450mm |
| Hinge Pin Height - Fully Raised | 110.63in | 2810mm |
| Height To Top Of Rops | 77.17in | 1960mm |
?Questions & answersfrom this machine's data
- How much does a Case 1838 skid steer weigh?
- A Case 1838 skid steer has an operating weight of 5,216.1 lb (2,366 kg).
- How much can a Case 1838 skid steer lift?
- A Case 1838 skid steer has a rated operating capacity of 1,325 lb (601 kg).
- What engine does a Case 1838 skid steer have?
- A Case 1838 skid steer is powered by a Kubota V2203DI-B engine producing 46 hp (34.3 kW).
- What is the ground clearance of a Case 1838 skid steer?
- A Case 1838 skid steer has a ground clearance of 6.7 in (170 mm).
- How long is a Case 1838 skid steer?
- A Case 1838 skid steer has an overall length of 10.4 ft (3,180 mm) with the bucket on the ground.
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.