Specification sheet Skid Steer Loader Ref case-1835c-skid-steer-loader
Case 1835C
The Case 1835C is a skid steer loader with an operating weight of 10,912.89 lb (4,950 kg), a 48 hp engine, and a rated operating capacity of 1,200 lb (544.32 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
10,912.89lb
4,950kg
Engine power
48hp
35.8kW
Net Power Rated operating capacity
1,200lb
544.32kg
◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the Case 1835C sits at the heavy end of its class:
- Operating weight 10,910 lb heavier than 99% (n=334)
- Engine power 48 hp less powerful than 77% (n=335)
- Rated operating capacity 1,200 lb lower-rated than 90% (n=288)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 3 | |
|---|---|---|
| Engine Model | Wis-Con TM20 | |
| Gross Power | 51hp | 38.1kw |
| Net Power | 48hp | 35.8kw |
| Power Measured @ | 2700rpm | |
| Displacement | 123cu in | 2.1L |
| Bore | 3.6in | 91mm |
| Stroke | 4.1in | 103.2mm |
02 Operational Specification
| Operational Weight | 10912.9lb | 4950kg |
|---|---|---|
| Fuel Capacity | 19.5gal | 73.9L |
| Cooling System Fluid Capacity | 4.5gal | 17.1L |
| Engine Oil Fluid Capacity | 1.5gal | 5.7L |
| Hydraulic System Fluid Capacity | 10.5gal | 39.8L |
| Chain Box Fluid Capacity - Each Side | 1.5gal | 5.7L |
| Tire Size | 10.00 x 16.5 | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 65amps |
03 Loader Specification
| Tipping Load (Iso 14397) | 2400lb | 1088.7kg |
|---|---|---|
| Operating Load Rating | 1200lb | 544.4kg |
04 Hydraulic Specification
| Pump Type | Gear pump driven directl | |
|---|---|---|
| Raise Time | 4.4sec | |
| Dump Time | 2.2sec | |
| Lower Time | 2.3sec |
05 Dimensions Dimensions
| Length With Bucket | 10.42ft in | 3175mm |
|---|---|---|
| Width Over Tires | 4.08ft in | 1242.06mm |
| Ground Clearance | 6.5in | 165.1mm |
| Wheelbase | 3.09ft in | 939.8mm |
| Length W/O Bucket | 8.05ft in | 2451.1mm |
| Hinge Pin Height - Fully Raised | 110.5in | 2806.7mm |
| Height To Top Of Rops | 77in | 1955.8mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.