Specification sheet Wheel Loader Ref case-121f-wheel-loader
Case 121F
The Case 121F is a wheel loader with an operating weight of 11,618.37 lb (5,270 kg), a 60 hp engine, and a 1.05 yd³ (0.8 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
11,618.37lb
5,270kg
Engine power
60hp
44.8kW
Net Power Bucket capacity
1.05yd³
0.8m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Case 121F sits in the middle of its class:
- Operating weight 11,620 lb lighter than 57% (n=374)
- Engine power 60 hp less powerful than 65% (n=367)
- Bucket capacity 1.1 yd³ smaller-bucket than 76% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Emissions Certification | Final Tier 4 | |
|---|---|---|
| Fuel | Diesel | |
| Fuel Injection | High pressure, common rail injection | |
| Radiator Core Type | All aluminium | |
| Air Filter Type | Dry type element with warning restriction indicator | |
| Number Of Cylinders | 4 | |
| Engine Model | FPT F5H FL463 C F001 | |
| Engine Type | 4-stroke | |
| Net Power | 60hp | 44.8kw |
| Gross Power | 64hp | 47.8kw |
| Power Measured @ | 2500rpm | |
| Max Torque | 261 Nm, 193 lb ft | |
| Torque Measured @ | 1400rpm |
02 Operational Specification
| Operating Weight | 11618.4lb | 5270kg |
|---|---|---|
| Fuel Capacity | 22.8gal | 86L |
| Turning Radius | 12.3ft in | 3724mm |
03 Transmission Specification
| Transmission Type | Hydrostatic transmission |
|---|
04 Hydraulic System Specification
| Standard Pressure | 3626psi | 25000.4kPa |
|---|---|---|
| Pump Flow Capacity | 17.7gal/min | 67L/min |
| Pump Type | Gear |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 3.32ft in | 1009mm |
|---|---|---|
| Breakout Force | 8969.88lb | 39.9kN |
| Bucket Capacity - Heaped | 1.05yd3 | 0.8m3 |
06 Dimensions Dimensions
| Ground Clearance | 1.46ft in | 444mm |
|---|---|---|
| Length With Bucket On Ground | 18.53ft in | 5645mm |
| Width Over Tires | 5.71ft in | 1740mm |
| Height To Top Of Cab | 8.07ft in | 2457mm |
| Wheelbase | 6.81ft in | 2075mm |
| Hinge Pin - Max Height | 10.44ft in | 3182mm |
| Reach At Max Lift And Dump | 3.32ft in | 1009mm |
| Angle Of Departure | 28degrees |
?Questions & answersfrom this machine's data
- How much does a Case 121F wheel loader weigh?
- A Case 121F wheel loader has an operating weight of 11,618.4 lb (5,270 kg).
- What engine does a Case 121F wheel loader have?
- A Case 121F wheel loader is powered by a FPT F5H FL463 C F001 engine producing 60 hp (44.8 kW).
- What size bucket does a Case 121F wheel loader have?
- A Case 121F wheel loader has a bucket capacity of 1.1 yd³ (0.8 m³).
- How much fuel does a Case 121F wheel loader hold?
- A Case 121F wheel loader has a fuel capacity of 22.8 gal (86 L).
- What is the ground clearance of a Case 121F wheel loader?
- A Case 121F wheel loader has a ground clearance of 1.5 ft (444 mm).
- How long is a Case 121F wheel loader?
- A Case 121F wheel loader has an overall length of 18.5 ft (5,645 mm) with the bucket on the ground.
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.