Specification sheet Wheel Loader Ref case-1121g-wheel-loader

Case 1121G

The Case 1121G is a wheel loader with an operating weight of 61,650.07 lb (27,964 kg), a 284 hp engine, and a 6.28 yd³ (4.8 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
61,650.07lb
27,964kg
Engine power
284hp
211.8kW
Net Power
Bucket capacity
6.28yd³
4.8m³

Where it sits in its classpercentile · medium wheel loaders

Among 198 medium wheel loaders (45,000–90,000 lb), the Case 1121G sits above the median for its class:

  • Operating weight 61,650 lb heavier than 71% (n=198)
  • Engine power 284 hp more powerful than 56% (n=190)
  • Bucket capacity 6.3 yd³ larger-bucket than 73% (n=174)

Scale drawingdrawn to scale · mm

3576A2978C
Front elevation

01 Hydraulic Cycle Times (Unloaded) Specification

Total Cycle Time 10.7sec

02 Engine Specification

Number Of Cylinders 6
Rated Engine Speed 2100rpm
Engine Model FPT F2CFE614F
Net Power 284hp 211.8kw
Gross Power 347hp 258.8kw
Max Torque 1183.1lb ft 1604Nm
Displacement 531cu in 8.8L
Torque Rise 50%
Emissions Tier 4
Alternator 120amps

03 Operational Specification

Def Tank Capacity 24gal 90.8L
Operating Weight 61650.1lb 27964kg
Fuel Capacity 125gal 473L
Cooling System Fluid Capacity 15.1gal 56.8L
Transmission Fluid Capacity 12gal 45.4L
Front Axle/Diff Fluid Capacity 17gal 64L
Rear Axle/Diff Fluid Capacity 17gal 64L

04 Performance Specification

Bucket Breakout Force, Sae 45051.8lb 200.4kN

05 Transmission Specification

Differential Lock F: Open / R: Open
Transmission Type Powershift
Number Of Forward Gears 4
Number Of Reverse Gears 3
Max Speed - Forward 23.2mph 37.4km/h

06 Hydraulic System Specification

Steering Pump Type Articulation
Maximum System Pressure 3650psi 25165.9kPa
Pump Flow Capacity 50.2gal/min 190L/min
Pump Type Piston

07 Brakes Specification

Service Brake Wet Multi Disc

08 Bucket Dimensions

Bucket Capacity - Heaped 6.28yd3 4.8m3
Breakout Force 49930.07lb 222.1kN

09 Dimensions Dimensions

Ground Clearance 1.44ft in 437mm
Width Over Tires 9.78ft in 2978mm
Height To Top Of Cab 11.74ft in 3576mm
Wheelbase 11.65ft in 3550mm
Hinge Pin - Max Height 14.6ft in 4449mm
Reach At Max Lift And Dump 6.71ft in 2043mm
Overall Width Without Bucket 117.25in 2978mm
Turning Radius Outside Tires 20.89ft in 6366mm
Dump Reach @ Full Height, 45° Dump: Bucket 4.18ft in 1.28m
Bucket Reach - Fully Raised, 45° Dump 50.12in 1273mm
Dump Height - Fully Raised, 45° Dump 126.34in 3209mm
Operating Height - Fully Raised With Spillgaurd 242.01in 6147mm
Overall Length (L/Bucket) 29.6ft in 9020mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.