Specification sheet Wheel Loader Ref case-1021g-wheel-loader

Case 1021G

The Case 1021G is a wheel loader with an operating weight of 56,365.59 lb (25,567 kg), a 262 hp engine, and a 5.5 yd³ (4.2 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
56,365.59lb
25,567kg
Engine power
262hp
195.4kW
Net Power
Bucket capacity
5.5yd³
4.2m³

Where it sits in its classpercentile · medium wheel loaders

Among 198 medium wheel loaders (45,000–90,000 lb), the Case 1021G sits in the middle of its class:

  • Operating weight 56,370 lb heavier than 59% (n=198)
  • Engine power 262 hp less powerful than 69% (n=190)
  • Bucket capacity 5.5 yd³ smaller-bucket than 56% (n=174)

Scale drawingdrawn to scale · mm

3577A2978C
Front elevation

01 Hydraulic Cycle Times (Unloaded) Specification

Total Cycle Time 10.3sec

02 Engine Specification

Number Of Cylinders 6
Rated Engine Speed 2100rpm
Engine Model FPT F2CFE614H
Net Power 262hp 195.4kw
Gross Power 320hp 238.7kw
Max Torque 1090.9lb ft 1479Nm
Displacement 531cu in 8.8L
Torque Rise 50%
Emissions Tier 4
Alternator 120amps

03 Operational Specification

Def Tank Capacity 24gal 90.8L
Operating Weight 56365.6lb 25567kg
Fuel Capacity 125gal 473L
Cooling System Fluid Capacity 15.1gal 56.8L
Transmission Fluid Capacity 12gal 45.4L
Front Axle/Diff Fluid Capacity 16.4gal 62L
Rear Axle/Diff Fluid Capacity 11.1gal 42L
Operating Voltage 24V
Rear Axle Oscillation 26degrees

04 Performance Specification

Bucket Breakout Force, Sae 45051.8lb 200.4kN

05 Transmission Specification

Differential Lock F: Open / R: Open
Transmission Type Powershift
Number Of Forward Gears 4
Number Of Reverse Gears 3
Max Speed - Forward 22mph 35.5km/h

06 Hydraulic System Specification

Steering Pump Type Articulation
Maximum System Pressure 3650psi 25165.9kPa
Pump Flow Capacity 50.2gal/min 190L/min
Pump Type Piston

07 Brakes Specification

Service Brake Wet Multi Disc

08 Bucket Dimensions

Bucket Capacity - Heaped 5.5yd3 4.2m3
Breakout Force 37677.98lb 167.6kN

09 Dimensions Dimensions

Ground Clearance 1.44ft in 437mm
Width Over Tires 9.78ft in 2978mm
Height To Top Of Cab 11.74ft in 3577mm
Wheelbase 11.65ft in 3550mm
Hinge Pin - Max Height 13.94ft in 4246mm
Reach At Max Lift And Dump 6.2ft in 1888mm
Overall Width Without Bucket 117.25in 2978mm
Turning Radius Outside Tires 20.89ft in 6366mm
Dump Reach @ Full Height, 45° Dump: Bucket 4.16ft in 1.27m
Bucket Reach - Fully Raised, 45° Dump 49.81in 1265mm
Dump Height - Fully Raised, 45° Dump 121.15in 3077mm
Operating Height - Fully Raised With Spillgaurd 229.26in 5823mm
Overall Length (L/Bucket) 29.36ft in 8948mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.