Specification sheet Compact Track Loader Ref boxer-427-multi-terrain-loader
Boxer 427
The Boxer 427 is a compact track loader with an operating weight of 2,250.92 lb (1,021 kg), a 27 hp engine, and a rated operating capacity of 599.66 lb (272 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
2,250.92lb
1,021kg
Engine power
27hp
20.2kW
Gross Power Rated operating capacity
599.66lb
272kg
◆Where it sits in its classpercentile · compact track loaders
Among 184 compact track loaders , the Boxer 427 sits at the compact end of its class:
- Operating weight 2,250 lb lighter than 98% (n=182)
- Engine power 27 hp less powerful than 96% (n=167)
- Rated operating capacity 600 lb lower-rated than 96% (n=156)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | Kohler Command | |
|---|---|---|
| Gross Power | 27hp | 20.2kw |
02 Operational Specification
| Operating Weight | 2251lb | 1021kg |
|---|---|---|
| Fuel Capacity | 10gal | 37.9L |
| Travel Speed | 3.5mph | 5.6km/h |
03 Loader Specification
| Wheel (Track Options) | 36.5in | 927mm |
|---|---|---|
| Tip Capacity | 1799lb | 816kg |
| Operating Load | 599.7lb | 272kg |
04 Hydraulic Specification
| Pump Flow | 12.6gal/min | 47.7L/min |
|---|---|---|
| Relief Valve Pressure | 3000psi | 20684.3kPa |
05 Dimensions Dimensions
| Ground Clearance | 7.01in | 178mm |
|---|---|---|
| Dump Height - Maximum | 55.52in | 1410mm |
| Width | 3.63ft in | 1105mm |
| Dump Angle | 34degrees | |
| Hinge Pin Height - Fully Raised | 70.4in | 1788mm |
| Length With Bucket | 7.49ft in | 2280mm |
| Length With Out Bucket | 5.82ft in | 1772mm |
| Overall Height | 4.17ft in | 1270mm |
06 Undercarriage Dimensions
| Ground Pressure | 3.41psi | 23.5kPa |
|---|
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.