Specification sheet Compact Track Loader Ref boxer-322d-multi-terrain-loader
Boxer 322D
The Boxer 322D is a compact track loader with an operating weight of 1,900.39 lb (862 kg), a 22 hp engine, and a rated operating capacity of 462.98 lb (210 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
1,900.39lb
862kg
Engine power
22hp
16.5kW
Gross Power Rated operating capacity
462.98lb
210kg
◆Where it sits in its classpercentile · compact track loaders
Among 184 compact track loaders , the Boxer 322D sits at the compact end of its class:
- Operating weight 1,900 lb lighter than 99% (n=182)
- Engine power 22 hp less powerful than 98% (n=167)
- Rated operating capacity 460 lb lower-rated than 99% (n=156)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | Kohler Command | |
|---|---|---|
| Gross Power | 22hp | 16.5kw |
02 Operational Specification
| Operating Weight | 1900.4lb | 862kg |
|---|---|---|
| Fuel Capacity | 4.5gal | 17.1L |
| Travel Speed | 3.5mph | 5.5km/h |
03 Loader Specification
| Wheel (Track Options) | 7.1in | 180mm |
|---|---|---|
| Tip Capacity | 1325lb | 601.1kg |
| Ground Drive | 3gal/min | 11.4L/min |
| Operating Load | 463lb | 210kg |
04 Hydraulic Specification
| Hydraulic Reservoir | 16gal | 60.6L |
|---|---|---|
| Auxiliary Hydraulic Flow | 9.4gal/min | 35.6L/min |
| Relief Valve Pressure | 3000psi | 20684.3kPa |
05 Dimensions Dimensions
| Ground Clearance | 5in | 127mm |
|---|---|---|
| Dump Height - Maximum | 54.02in | 1372mm |
| Width | 2.88ft in | 876mm |
| Dump Angle | 34degrees | |
| Hinge Pin Height - Fully Raised | 70in | 1778mm |
| Length With Bucket | 7.75ft in | 2362mm |
| Length With Out Bucket | 5.67ft in | 1727mm |
| Overall Height | 4.09ft in | 1245mm |
06 Undercarriage Dimensions
| Ground Pressure | 3.3psi | 22.76kPa |
|---|
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.