Specification sheet Compact Track Loader Ref bobcat-t870-multi-terrain-loader

Bobcat T870

The Bobcat T870 is a compact track loader with an operating weight of 12,925 lb (5,862.69 kg), a 100 hp engine, a rated operating capacity of 5,215 lb (2,365.49 kg), and a tipping load of 10,430 lb (4,730.97 kg).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
12,925lb
5,862.69kg
Engine power
100hp
74.6kW
Gross Power
Rated operating capacity
5,215lb
2,365.49kg
Tipping load
10,430lb † — value reconstructed from related published figures
4,730.97kg

◆Where it sits in its classpercentile · compact track loaders

Among 184 compact track loaders , the Bobcat T870 sits at the heavy end of its class:

  • Operating weight 12,930 lb heavier than 97% (n=182)
  • Engine power 100 hp more powerful than 96% (n=167)
  • Rated operating capacity 5,220 lb higher-rated than 99% (n=156)

◇Scale drawingdrawn to scale · mm

2118C3911A3030B1750D
Side elevation
2118C2109E
Front elevation

01 Engine Specification

Fuel Diesel
Emission Tier Level Tier 4
Gross Power 100hp 74.6kw
Aspiration Turbocharged

02 Operational Specification

Operating Weight 12925lb 5862.7kg
Cooling System Fluid Capacity 4gal 15.2L
Fuel Capacity 32.6gal 123.5L

03 Loader Specification

Operating Load 5215lb 2365.5kg

04 Hydraulic Specification

Pump Flow 23gal/min 87.1L/min
Relief Valve Pressure 3500psi 24131.7kPa

05 Dimensions Dimensions

Width Over Tracks 6.92ft in 2109.22mm
Height To Top Of Cab 6.95ft in 2118.36mm
Reach At Max Lift And Dump 3.04ft in 926.6mm
Length With Out Bucket 9.94ft in 3029.72mm
Length With Bucket 12.83ft in 3910.59mm

06 Undercarriage Dimensions

Length Of Track On Ground 5.74ft in 1749.56mm
Ground Pressure 4.7psi 32.41kPa
Width Of Track 17.7in 449.58mm

Data notes

†

Derived value. tipping load was not published directly in a usable form by the source. It was reconstructed from related published figures and accepted only after validating against the expected relationship between specifications for this machine class.

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.