Specification sheet Compact Track Loader Ref bobcat-t770-multi-terrain-loader
Bobcat T770
The Bobcat T770 is a compact track loader with an operating weight of 10,327 lb (4,684.25 kg), a 92 hp engine, and a rated operating capacity of 3,475 lb (1,576.24 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
10,327lb
4,684.25kg
Engine power
92hp
68.61kW
Net Power Rated operating capacity
3,475lb
1,576.24kg
◆Where it sits in its classpercentile · compact track loaders
Among 184 compact track loaders , the Bobcat T770 sits above the median for its class:
- Operating weight 10,330 lb heavier than 75% (n=182)
- Engine power 92 hp more powerful than 85% (n=167)
- Rated operating capacity 3,480 lb higher-rated than 77% (n=156)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Fuel | Diesel | |
|---|---|---|
| Emission Tier Level | Tier 4 | |
| Net Power | 92hp | 68.7kw |
| Aspiration | Turbocharged |
02 Operational Specification
| Operating Weight | 10327lb | 4684.3kg |
|---|---|---|
| Fuel Capacity | 27.2gal | 103L |
| Max Speed - Low Range | 6.6mph | 10.7km/h |
| Max Speed - High Range | 10.7mph | 17.3km/h |
03 Loader Specification
| Operating Load | 3475lb | 1576.3kg |
|---|---|---|
| Bucket Width | 80in | 2032mm |
04 Hydraulic Specification
| Pump Flow | 23gal/min | 87.1L/min |
|---|---|---|
| Relief Valve Pressure | 3500psi | 24131.7kPa |
05 Dimensions Dimensions
| Width Over Tracks | 6.6ft in | 2011.68mm |
|---|---|---|
| Height To Top Of Cab | 6.8ft in | 2072.64mm |
| Reach At Max Lift And Dump | 2.9ft in | 883.92mm |
| Length With Out Bucket | 9.5ft in | 2895.6mm |
| Length With Bucket | 11.8ft in | 3596.64mm |
| Turning Radius From Center - Machine Rear | 88in | 2235.2mm |
06 Undercarriage Dimensions
| Length Of Track On Ground | 5.4ft in | 1645.92mm |
|---|---|---|
| Width Of Track | 17.7in | 449.58mm |
| Ground Pressure | 4.2psi | 28.96kPa |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.