Specification sheet Compact Track Loader Ref bobcat-t595-multi-terrain-loader
Bobcat T595
The Bobcat T595 is a compact track loader with an operating weight of 8,055 lb (3,653.69 kg), and a rated operating capacity of 2,200 lb (997.91 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
8,055lb
3,653.69kg
Rated operating capacity
2,200lb
997.91kg
◆Where it sits in its classpercentile · compact track loaders
Among 184 compact track loaders , the Bobcat T595 sits below the median for its class:
- Operating weight 8,060 lb lighter than 69% (n=182)
- Rated operating capacity 2,200 lb lower-rated than 65% (n=156)
Not positioned on engine power — withheld or unpublished for this machine.
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Fuel | Diesel | |
|---|---|---|
| Emission Tier Level | Tier 4 | |
| Horsepower - Gross | 74hp | 55.2kw |
02 Operational Specification
| Operating Weight | 8055lb | 3653.7kg |
|---|---|---|
| Fuel Capacity | 36.5gal | 138.2L |
| Travel Speed | 7.1mph | 11.5km/h |
03 Loader Specification
| Operating Load | 2200lb | 998kg |
|---|
04 Hydraulic Specification
| Auxiliary Hydraulic Flow | 17.1gal/min | 64.8L/min |
|---|---|---|
| Relief Valve Pressure | 3500psi | 24131.7kPa |
05 Dimensions Dimensions
| Height To Top Of Cab | 6.49ft in | 1976.12mm |
|---|---|---|
| Reach At Max Lift And Dump | 2.91ft in | 886.46mm |
| Length With Out Bucket | 8.72ft in | 2656.84mm |
| Turning Radius From Center - Machine Rear | 6.67in | 169.34mm |
| Overall Track Length | 4.51ft in | 1374.14mm |
| Overall Width | 5.6ft in | 1704.35mm |
| Overall Height | 6.49ft in | 1976.12mm |
| Length With Bucket | 11.09ft in | 3378.19mm |
06 Undercarriage Dimensions
| Width Of Track | 12.6in | 320.05mm |
|---|---|---|
| Ground Pressure | 5.1psi | 35.17kPa |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.