Specification sheet Compact Track Loader Ref bobcat-t320-multi-terrain-loader

Bobcat T320

The Bobcat T320 is a compact track loader with an operating weight of 9,702 lb (4,400.76 kg), a 92 hp engine, a rated operating capacity of 4,604 lb (2,088.34 kg), and a tipping load of 9,208 lb (4,176.68 kg).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
9,702lb
4,400.76kg
Engine power
92hp
68.7kW
Gross Power
Rated operating capacity
4,604lb
2,088.34kg

Where it sits in its classpercentile · compact track loaders

Among 184 compact track loaders , the Bobcat T320 sits in the middle of its class:

  • Operating weight 9,700 lb heavier than 59% (n=182)
  • Engine power 92 hp more powerful than 85% (n=167)
  • Rated operating capacity 4,600 lb higher-rated than 95% (n=156)

Scale drawingdrawn to scale · mm

2054C3630A2908B1618D
Side elevation
2054C1981E
Front elevation

01 Engine Specification

Gross Power 92hp 68.7kw
Aspiration Turbocharged

02 Operational Specification

Operating Weight 9702lb 4400.8kg
Cooling System Fluid Capacity 3.6gal 13.7L
Fuel Capacity 26gal 98.5L
Max Speed - Low Range 6.6mph 10.7km/h

03 Loader Specification

Operating Load 4604lb 2088.4kg

04 Hydraulic Specification

Pump Flow 21.2gal/min 80.3L/min

05 Dimensions Dimensions

Width Over Tracks 6.5ft in 1981.2mm
Height To Top Of Cab 6.74ft in 2054.36mm
Reach At Max Lift And Dump 3.04ft in 926.6mm
Length With Out Bucket 9.54ft in 2907.8mm
Length With Bucket 11.91ft in 3630.17mm

06 Undercarriage Dimensions

Length Of Track On Ground 5.31ft in 1618.49mm
Ground Pressure 3.9psi 26.89kPa
Width Of Track 17.7in 449.58mm

Data notes

Derived value. tipping load was not published directly in a usable form by the source. It was reconstructed from related published figures and accepted only after validating against the expected relationship between specifications for this machine class.

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.