Specification sheet Compact Track Loader Ref bobcat-t300-multi-terrain-loader

Bobcat T300

The Bobcat T300 is a compact track loader with an operating weight of 9,702 lb (4,400.76 kg), a 81 hp engine, a rated operating capacity of 3,000 lb (1,360.78 kg), and a 0.6 yd³ (0.4 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
9,702lb
4,400.76kg
Engine power
81hp
60.5kW
Gross Power
Rated operating capacity
3,000lb
1,360.78kg
Bucket capacity
0.6yd³
0.4m³

Where it sits in its classpercentile · compact track loaders

Among 184 compact track loaders , the Bobcat T300 sits in the middle of its class:

  • Operating weight 9,700 lb heavier than 59% (n=182)
  • Engine power 81 hp more powerful than 66% (n=167)
  • Rated operating capacity 3,000 lb higher-rated than 63% (n=156)

Scale drawingdrawn to scale · mm

2055C3630A2918B1618D
Side elevation
2055C1981E
Front elevation

01 Engine Specification

Number Of Cylinders 4
Engine Make 2334
Engine Model V3300TE
Gross Power 81hp 60.5kw
Power Measured @ 2400rpm
Displacement 201.4cu in 3.3L
Aspiration turbocharged

02 Operational Specification

Operating Weight 9702lb 4400.8kg
Fuel Capacity 30gal 113.6L
Max Speed - High Range 6.6mph 10.7km/h

03 Loader Specification

Operating Load 3000lb 1360.8kg
Bucket Capacity 0.6yd3 0.4m3

04 Hydraulic Specification

Pump Flow 21.2gal/min 80.3L/min
Relief Valve Pressure 3300psi 22752.7kPa

05 Dimensions Dimensions

Width Over Tracks 6.5ft in 1981mm
Height To Top Of Cab 6.75ft in 2055mm
Clearance At Max Lift And Dump 8.26ft in 2517mm
Reach At Max Lift And Dump 2.82ft in 859mm
Length With Bucket 11.91ft in 3630mm
Length With Out Bucket 9.58ft in 2918mm
Turning Radius From Center - Inc Bucket 84.22in 2139mm

06 Undercarriage Dimensions

Length Of Track On Ground 5.31ft in 1618mm
Track Gauge 5.03ft in 1532mm
Number Of Track Rollers Per Side 5
Width Of Track 17.72in 450mm
Ground Pressure 4.2psi 28.96kPa

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.