Specification sheet Compact Track Loader Ref bobcat-t250-multi-terrain-loader
Bobcat T250
The Bobcat T250 is a compact track loader with an operating weight of 9,347 lb (4,239.73 kg), a 81 hp engine, and a rated operating capacity of 2,500 lb (1,133.99 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
9,347lb
4,239.73kg
Engine power
81hp
60.5kW
Gross Power Rated operating capacity
2,500lb
1,133.99kg
◆Where it sits in its classpercentile · compact track loaders
Among 184 compact track loaders , the Bobcat T250 sits in the middle of its class:
- Operating weight 9,350 lb lighter than 52% (n=182)
- Engine power 81 hp more powerful than 66% (n=167)
- Rated operating capacity 2,500 lb lower-rated than 56% (n=156)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Gross Power | 81hp | 60.5kw |
|---|---|---|
| Aspiration | turbocharged |
02 Operational Specification
| Operating Weight | 9347lb | 4239.8kg |
|---|---|---|
| Fuel Capacity | 30.2gal | 114L |
| Max Speed - High Range | 6.6mph | 10.6km/h |
03 Loader Specification
| Operating Load | 2500lb | 1134kg |
|---|
04 Hydraulic Specification
| Pump Flow | 21.2gal/min | 80.3L/min |
|---|---|---|
| Relief Valve Pressure | 3300psi | 22752.7kPa |
05 Dimensions Dimensions
| Width Over Tracks | 6.5ft in | 1981mm |
|---|---|---|
| Height To Top Of Cab | 6.75ft in | 2055mm |
| Clearance At Max Lift And Dump | 7.95ft in | 2423mm |
| Reach At Max Lift And Dump | 1.99ft in | 605mm |
| Length With Bucket | 11.91ft in | 3630mm |
| Length With Out Bucket | 9.58ft in | 2918mm |
| Turning Radius From Center - Inc Bucket | 82.41in | 2093mm |
06 Undercarriage Dimensions
| Length Of Track On Ground | 5.31ft in | 1618mm |
|---|---|---|
| Track Gauge | 5.03ft in | 1532mm |
| Number Of Track Rollers Per Side | 5 | |
| Width Of Track | 17.72in | 450mm |
| Ground Pressure | 4psi | 27.58kPa |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.