Specification sheet Compact Track Loader Ref bobcat-t190-multi-terrain-loader

Bobcat T190

The Bobcat T190 is a compact track loader with an operating weight of 7,612 lb (3,452.75 kg), a 61 hp engine, a rated operating capacity of 1,900 lb (861.83 kg), and a 0.6 yd³ (0.4 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
7,612lb
3,452.75kg
Engine power
61hp
45.5kW
Gross Power
Rated operating capacity
1,900lb
861.83kg
Bucket capacity
0.6yd³
0.4m³

Where it sits in its classpercentile · compact track loaders

Among 184 compact track loaders , the Bobcat T190 sits below the median for its class:

  • Operating weight 7,610 lb lighter than 76% (n=182)
  • Engine power 61 hp less powerful than 77% (n=167)
  • Rated operating capacity 1,900 lb lower-rated than 83% (n=156)

Scale drawingdrawn to scale · mm

1938C3310A2585B1401D
Side elevation
1938C1676E
Front elevation

01 Engine Specification

Number Of Cylinders 4
Engine Make 2334
Engine Model V2003T
Gross Power 61hp 45.5kw
Power Measured @ 2800rpm
Displacement 122.1cu in 2L
Aspiration turbocharged

02 Operational Specification

Operating Weight 7612lb 3452.8kg
Fuel Capacity 28gal 106L
Max Speed - High Range 7.1mph 11.5km/h

03 Loader Specification

Operating Load 1900lb 861.9kg
Bucket Capacity 0.6yd3 0.4m3

04 Hydraulic Specification

Pump Flow 16.3gal/min 61.8L/min
Relief Valve Pressure 3300psi 22752.7kPa

05 Dimensions Dimensions

Width Over Tracks 5.5ft in 1676mm
Height To Top Of Cab 6.36ft in 1938mm
Clearance At Max Lift And Dump 7.58ft in 2310mm
Reach At Max Lift And Dump 2.58ft in 784mm
Length With Bucket 10.86ft in 3310.13mm
Length With Out Bucket 8.48ft in 2584.71mm
Turning Radius From Center - Inc Bucket 78.78in 2001mm

06 Undercarriage Dimensions

Length Of Track On Ground 4.6ft in 1401mm
Track Gauge 4.45ft in 1356mm
Number Of Track Rollers Per Side 4
Width Of Track 12.6in 320mm
Ground Pressure 4.91psi 33.79kPa

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.