Specification sheet Compact Track Loader Ref bobcat-t180-multi-terrain-loader
Bobcat T180
The Bobcat T180 is a compact track loader with an operating weight of 7,367 lb (3,341.62 kg), a 61 hp engine, and a rated operating capacity of 1,800 lb (816.47 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
7,367lb
3,341.62kg
Engine power
61hp
45.5kW
Gross Power Rated operating capacity
1,800lb
816.47kg
◆Where it sits in its classpercentile · compact track loaders
Among 184 compact track loaders , the Bobcat T180 sits below the median for its class:
- Operating weight 7,370 lb lighter than 81% (n=182)
- Engine power 61 hp less powerful than 77% (n=167)
- Rated operating capacity 1,800 lb lower-rated than 86% (n=156)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Gross Power | 61hp | 45.5kw |
|---|---|---|
| Aspiration | turbocharged |
02 Operational Specification
| Operating Weight | 7367lb | 3341.7kg |
|---|---|---|
| Fuel Capacity | 28.1gal | 106L |
| Max Speed - High Range | 7.1mph | 11.5km/h |
03 Loader Specification
| Operating Load | 1800lb | 816.5kg |
|---|
04 Hydraulic Specification
| Pump Flow | 16.3gal/min | 61.8L/min |
|---|---|---|
| Relief Valve Pressure | 3300psi | 22752.7kPa |
05 Dimensions Dimensions
| Width Over Tracks | 5.5ft in | 1676mm |
|---|---|---|
| Height To Top Of Cab | 6.36ft in | 1938mm |
| Clearance At Max Lift And Dump | 7.21ft in | 2197mm |
| Reach At Max Lift And Dump | 1.59ft in | 484mm |
| Length With Bucket | 10.86ft in | 3310mm |
| Length With Out Bucket | 8.49ft in | 2586mm |
| Turning Radius From Center - Inc Bucket | 78.78in | 2001mm |
06 Undercarriage Dimensions
| Length Of Track On Ground | 4.6ft in | 1401mm |
|---|---|---|
| Track Gauge | 4.45ft in | 1356mm |
| Number Of Track Rollers Per Side | 4 | |
| Width Of Track | 12.6in | 320mm |
| Ground Pressure | 4.91psi | 33.79kPa |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.