Specification sheet Compact Track Loader Ref bobcat-t140-multi-terrain-loader

Bobcat T140

The Bobcat T140 is a compact track loader with an operating weight of 6,660 lb (3,020.93 kg), a 46 hp engine, a rated operating capacity of 1,400 lb (635.03 kg), and a 0.5 yd³ (0.4 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
6,660lb
3,020.93kg
Engine power
46hp
34.4kW
Gross Power
Rated operating capacity
1,400lb
635.03kg
Bucket capacity
0.5yd³
0.4m³

Where it sits in its classpercentile · compact track loaders

Among 184 compact track loaders , the Bobcat T140 sits at the compact end of its class:

  • Operating weight 6,660 lb lighter than 86% (n=182)
  • Engine power 46 hp less powerful than 92% (n=167)
  • Rated operating capacity 1,400 lb lower-rated than 90% (n=156)

Scale drawingdrawn to scale · mm

1967C3153A2432B1230D
Side elevation
1967C1379E
Front elevation

01 Engine Specification

Number Of Cylinders 4
Engine Make 2334
Engine Model V2203M-DI
Gross Power 46hp 34.4kw
Power Measured @ 2800rpm
Displacement 134.3cu in 2.2L

02 Operational Specification

Operating Weight 6660lb 3021kg
Fuel Capacity 15gal 56.8L
Max Speed - High Range 7.3mph 11.8km/h

03 Loader Specification

Operating Load 1400lb 635.1kg
Bucket Capacity 0.5yd3 0.4m3

04 Hydraulic Specification

Pump Flow 16.9gal/min 64L/min
Relief Valve Pressure 2700psi 18615.9kPa

05 Dimensions Dimensions

Width Over Tracks 4.53ft in 1379mm
Height To Top Of Cab 6.46ft in 1967mm
Clearance At Max Lift And Dump 6.91ft in 2104mm
Reach At Max Lift And Dump 2.13ft in 649mm
Length With Bucket 10.35ft in 3153mm
Length With Out Bucket 7.98ft in 2432mm
Turning Radius From Center - Inc Bucket 77.17in 1960mm

06 Undercarriage Dimensions

Length Of Track On Ground 4.04ft in 1230mm
Track Gauge 3.6ft in 1097mm
Number Of Track Rollers Per Side 3
Width Of Track 11.82in 300mm
Ground Pressure 5.2psi 35.86kPa

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.