The Bobcat T110 is a compact track loader with an operating weight of 5,202 lb (2,359.59 kg), a 41.8 hp engine, a rated operating capacity of 1,595 lb (723.48 kg), and a tipping load of 3,190 lb (1,446.96 kg).
◆Where it sits in its classpercentile · compact track loaders
Among 184 compact track loaders , the Bobcat T110 sits at the compact end of its class:
Operating weight5,200 lblighter than 93%(n=182)
Engine power42 hpless powerful than 93%(n=167)
Rated operating capacity1,600 lblower-rated than 88%(n=156)
◇Scale drawingdrawn to scale · mm
Side elevationFront elevation
01 Engine Specification
Gross Power
41.8hp
31.2kw
Aspiration
Natural
02 Operational Specification
Operating Weight
5202lb
2359.6kg
Fuel Capacity
11.9gal
45.1L
Max Speed - Low Range
5.2mph
8.4km/h
Max Speed - High Range
8.4mph
13.6km/h
03 Loader Specification
Operating Load
1595lb
723.5kg
04 Hydraulic Specification
Pump Flow
12.5gal/min
47.4L/min
05 Dimensions Dimensions
E Width Over Tracks
3.93ft in
1197.87mm
C Height To Top Of Cab
6.18ft in
1883.67mm
Reach At Max Lift And Dump
1.9ft in
579.12mm
B Length With Out Bucket
7.5ft in
2286mm
A Length With Bucket
9.75ft in
2971.8mm
06 Undercarriage Dimensions
D Length Of Track On Ground
4.26ft in
1298.45mm
Ground Pressure
4.6psi
31.72kPa
Width Of Track
9.81in
248.92mm
?Questions & answersfrom this machine's data
How much does a Bobcat T110 compact track loader weigh?
A Bobcat T110 compact track loader has an operating weight of 5,202 lb (2,359.6 kg).
How much can a Bobcat T110 compact track loader lift?
A Bobcat T110 compact track loader has a rated operating capacity of 1,595 lb (723.5 kg).
What engine does a Bobcat T110 compact track loader have?
A Bobcat T110 compact track loader is powered by an engine producing 41.8 hp (31.2 kW).
How much fuel does a Bobcat T110 compact track loader hold?
A Bobcat T110 compact track loader has a fuel capacity of 11.9 gal (45.1 L).
How long is a Bobcat T110 compact track loader?
A Bobcat T110 compact track loader has an overall length of 9.8 ft (2,971.8 mm) with the bucket on the ground.
Data notes
†
Derived value. tipping load was not published directly in a usable form by the source. It was reconstructed from related published figures and accepted only after validating against the expected relationship between specifications for this machine class.
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.