Specification sheet Skid Steer Loader Ref bobcat-s850-skid-steer-loader

Bobcat S850

The Bobcat S850 is a skid steer loader with an operating weight of 10,008 lb (4,539.56 kg), a 100 hp engine, a rated operating capacity of 3,950 lb (1,791.69 kg), and a tipping load of 7,900 lb (3,583.38 kg).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
10,008lb
4,539.56kg
Engine power
100hp
74.6kW
Gross Power
Rated operating capacity
3,950lb
1,791.69kg

Where it sits in its classpercentile · skid steer loaders

Among 360 skid steer loaders , the Bobcat S850 sits at the heavy end of its class:

  • Operating weight 10,010 lb heavier than 97% (n=334)
  • Engine power 100 hp more powerful than 99% (n=335)
  • Rated operating capacity 3,950 lb higher-rated than 99% (n=288)

Scale drawingdrawn to scale · mm

2118C3752A3030B
Side elevation
2118C2006D
Front elevation

01 Engine Specification

Gross Power 100hp 74.6kw
Cooling System Liquid
Aspiration Tur Turbo Dieselbocharged

02 Operational Specification

Operational Weight 10008lb 4539.6kg
Fuel Capacity 32.8gal 124.2L
Max Speed 7.1mph 11.5km/h

03 Loader Specification

Operating Load Rating 3950lb 1791.7kg

04 Hydraulic Specification

Pump Flow Capacity 23gal/min 87.1L/min

05 Dimensions Dimensions

Length With Bucket 12.31ft in 3752.09mm
Width Over Tires 6.58ft in 2005.59mm
Height To Top Of Cab 6.95ft in 2118.36mm
Wheelbase 4.41ft in 1344.17mm
Length W/O Bucket 9.94ft in 3029.72mm
Reach At Max Lift And Dump 29.7in 754.38mm

Data notes

Derived value. tipping load was not published directly in a usable form by the source. It was reconstructed from related published figures and accepted only after validating against the expected relationship between specifications for this machine class.

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.