The Bobcat S770 is a skid steer loader with an operating weight of 9,314.54 lb (4,225 kg), a 92 hp engine, a rated operating capacity of 3,350 lb (1,519.54 kg), and a tipping load of 6,699.9 lb (3,039.03 kg).
◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the Bobcat S770 sits at the heavy end of its class:
Operating weight9,310 lbheavier than 96%(n=334)
Engine power92 hpmore powerful than 97%(n=335)
Rated operating capacity3,350 lbhigher-rated than 96%(n=288)
◇Scale drawingdrawn to scale · mm
Side elevationFront elevation
01 Engine Specification
Emission Tier Level
Tier 4
Gross Power
92hp
68.7kw
Cooling System
Liquid
Aspiration
Turbocharged
Fuel Type
Turbo Diesel
02 Operational Specification
Def Tank Capacity
4.6gal
17.5L
Lift Arm Path
Vertical
Operational Weight
9314.6lb
4225kg
Fuel Capacity
23.9gal
90.5L
Max Speed
7.1mph
11.5km/h
03 Loader Specification
Loader Series
M2-Series
Height To Hinge Pin
11.1ft in
3353mm
Operating Load Rating
3350lb
1519.6kg
Bucket Width
74.1in
1880mm
04 Hydraulic Specification
Main Pump Flow Standard
23gal/min
87.1L/min
Main Pump Flow Optional
36.6gal/min
138.6L/min
Relief Valve Pressure
3500psi
24131.7kPa
05 Dimensions Dimensions
A Length With Bucket
11.81ft in
3597mm
E Width Over Tires
6.02ft in
1832mm
D Ground Clearance
8.15in
207mm
C Height To Top Of Cab
6.78ft in
2065mm
Wheelbase
4.03ft in
1227mm
B Length W/O Bucket
9.53ft in
2903mm
Clearance At Max Lift And Dump
8.7ft in
2649mm
Reach At Max Lift And Dump
31.5in
800mm
Data notes
†
Derived value. tipping load was not published directly in a usable form by the source. It was reconstructed from related published figures and accepted only after validating against the expected relationship between specifications for this machine class.
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.