The Bobcat S70 is a skid steer loader with an operating weight of 2,795.47 lb (1,268 kg), a 23.5 hp engine, a rated operating capacity of 700 lb (317.52 kg), and a tipping load of 1,512.4 lb (686.01 kg).
◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the Bobcat S70 sits at the compact end of its class:
Operating weight2,800 lblighter than 96%(n=334)
Engine power24 hpless powerful than 96%(n=335)
Rated operating capacity700 lblower-rated than 97%(n=288)
◇Scale drawingdrawn to scale · mm
Side elevationFront elevation
01 Engine Specification
Emission Tier Level
Tier 4
Number Of Cylinders
3
Engine Model
D1005-E
Gross Power
23.5hp
17.6kw
Cooling System
Liquid
Aspiration
Natural
Fuel Type
Diesel
Displacement
61.1cu in
1L
02 Operational Specification
Lift Arm Path
Radius
Operational Weight
2795.5lb
1268kg
Fuel Capacity
6.5gal
24.7L
Max Speed
6.1mph
9.9km/h
Tire Size
5.7-12
03 Loader Specification
Loader Series
K-Series
Height To Hinge Pin
7.9ft in
2400mm
Operating Load Rating
700lb
317.6kg
Bucket Width
36in
914mm
04 Hydraulic Specification
Main Pump Flow Standard
9.8gal/min
37.1L/min
Relief Valve Pressure
3000psi
20684.3kPa
05 Dimensions Dimensions
A Length With Bucket
8.12ft in
2472mm
E Width Over Tires
2.96ft in
901.7mm
D Ground Clearance
5.56in
141mm
C Height To Top Of Cab
5.96ft in
1814mm
Wheelbase
2.37ft in
722mm
B Length W/O Bucket
6.32ft in
1925mm
Clearance At Max Lift And Dump
6.35ft in
1934mm
Reach At Max Lift And Dump
15.75in
400mm
Turning Radius From Center - Inc Bucket
61.3in
1557mm
Data notes
†
Derived value. tipping load was not published directly in a usable form by the source. It was reconstructed from related published figures and accepted only after validating against the expected relationship between specifications for this machine class.
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.