The Bobcat S650 is a skid steer loader with an operating weight of 2,690 lb (1,220.17 kg), a 74.3 hp engine, a rated operating capacity of 2,690 lb (1,220.17 kg), and a tipping load of 5,380 lb (2,440.33 kg).
◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the Bobcat S650 sits at the compact end of its class:
Operating weight2,690 lblighter than 97%(n=334)
Engine power74 hpmore powerful than 75%(n=335)
Rated operating capacity2,690 lbhigher-rated than 84%(n=288)
◇Scale drawingdrawn to scale · mm
Side elevationFront elevation
01 Engine Specification
Emissions Certification
Tier 4
Gross Power
74.3hp
55.5kw
Cooling System
Liquid
Aspiration
Turbocharged
Fuel Type
Diesel
02 Operational Specification
Operational Weight
2690lb
1220.2kg
Fuel Capacity
23.9gal
90.5L
Max Speed
7.1mph
11.5km/h
03 Loader Specification
Operating Load Rating
2690lb
1220.2kg
04 Hydraulic Specification
Pump Flow Capacity
23gal/min
87.1L/min
05 Dimensions Dimensions
A Length With Bucket
11.4ft in
3474.72mm
D Width Over Tires
6ft in
1828.8mm
C Height To Top Of Cab
6.78ft in
2066.55mm
Wheelbase
3.78ft in
1152.15mm
B Length W/O Bucket
9.04ft in
2753.36mm
Reach At Max Lift And Dump
31.5in
800.1mm
Turning Radius From Center - Inc Bucket
82.9in
2105.66mm
?Questions & answersfrom this machine's data
How much does a Bobcat S650 skid steer weigh?
A Bobcat S650 skid steer has an operating weight of 2,690 lb (1,220.2 kg).
How much can a Bobcat S650 skid steer lift?
A Bobcat S650 skid steer has a rated operating capacity of 2,690 lb (1,220.2 kg).
What engine does a Bobcat S650 skid steer have?
A Bobcat S650 skid steer is powered by an engine producing 74.3 hp (55.5 kW).
How long is a Bobcat S650 skid steer?
A Bobcat S650 skid steer has an overall length of 11.4 ft (3,474.7 mm) with the bucket on the ground.
Data notes
†
Derived value. tipping load was not published directly in a usable form by the source. It was reconstructed from related published figures and accepted only after validating against the expected relationship between specifications for this machine class.
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.