The Bobcat S630 is a skid steer loader with an operating weight of 7,610 lb (3,451.84 kg), a 74 hp engine, a rated operating capacity of 2,180 lb (988.84 kg), and a tipping load of 4,360 lb (1,977.67 kg).
◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the Bobcat S630 sits above the median for its class:
Operating weight7,610 lbheavier than 71%(n=334)
Engine power74 hpmore powerful than 69%(n=335)
Rated operating capacity2,180 lbhigher-rated than 65%(n=288)
◇Scale drawingdrawn to scale · mm
Side elevationFront elevation
01 Engine Specification
Emissions Certification
S630
Gross Power
74hp
55.2kw
Aspiration
Turbocharged
02 Operational Specification
Lift Arm Path
Radius
Operational Weight
7610lb
3451.9kg
Fuel Capacity
24gal
90.5L
Max Speed
7.1mph
11.5km/h
03 Loader Specification
Loader Series
M2-Series
Operating Load Rating
2180lb
988.9kg
04 Hydraulic Specification
Main Pump Flow Optional
30.5gal/min
115.5L/min
Pump Flow Capacity
23gal/min
87.1L/min
Relief Valve Pressure
3500psi
24131.7kPa
05 Dimensions Dimensions
A Length With Bucket
1.14ft in
347.48mm
D Width Over Tires
6.01ft in
1831.34mm
C Height To Top Of Cab
6.78ft in
2065.02mm
Wheelbase
3.78ft in
1150.62mm
B Length W/O Bucket
9.04ft in
2753.36mm
Reach At Max Lift And Dump
83.4in
2118.36mm
Data notes
†
Derived value. tipping load was not published directly in a usable form by the source. It was reconstructed from related published figures and accepted only after validating against the expected relationship between specifications for this machine class.
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.