Specification sheet Skid Steer Loader Ref bobcat-s530-skid-steer-loader
Bobcat S530
The Bobcat S530 is a skid steer loader with a 46.1 hp engine.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Engine power
46.1hp
34.38kW
Net Power ◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the Bobcat S530 sits below the median for its class:
- Engine power 46 hp less powerful than 79% (n=335)
Not positioned on operating weight, rated operating capacity — withheld or unpublished for this machine.
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | Kubota | |
| Engine Model | V2403-MDI-E3B | |
| Gross Power | 48.9hp | 36.5kw |
| Net Power | 46.1hp | 34.4kw |
| Power Measured @ | 2700rpm | |
| Max Torque | 117lb ft | 158.6Nm |
| Torque Measured @ | 1600rpm | |
| Displacement | 148.5cu in | 2.5L |
| Bore | 3.5in | 87mm |
| Stroke | 4.1in | 102.4mm |
02 Operational Specification
| Fuel Capacity | 24.8gal | 93.7L |
|---|---|---|
| Engine Oil Fluid Capacity | 2.3gal | 8.7L |
| Hydraulic System Fluid Capacity | 9.6gal | 36L |
| Max Speed | 7.4mph | 11.9km/h |
| Chain Box Fluid Capacity - Each Side | 8.6gal | 32.2L |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 90amps |
03 Loader Specification
| Tipping Load (Iso 14397) | 3699.4lb | 1678kg |
|---|
04 Hydraulic Specification
| Pump Type | Engine driven, gear type | |
|---|---|---|
| Pump Flow Capacity | 17.1gal/min | 64.7L/min |
| Relief Valve Pressure | 3500psi | 24131.7kPa |
| Raise Time | 3.8sec | |
| Dump Time | 2.3sec | |
| Lower Time | 2.5sec |
05 Dimensions Dimensions
| Length With Bucket | 11.09ft in | 3378mm |
|---|---|---|
| Ground Clearance | 7.29in | 185mm |
| Height To Top Of Cab | 6.47ft in | 1972mm |
| Wheelbase | 3.55ft in | 1082mm |
| Length W/O Bucket | 8.72ft in | 2657mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.