Specification sheet Skid Steer Loader Ref bobcat-s250-skid-steer-loader
Bobcat S250
The Bobcat S250 is a skid steer loader with an operating weight of 7,825 lb (3,549.37 kg), a 75 hp engine, a rated operating capacity of 2,500 lb (1,133.99 kg), and a 0.6 yd³ (0.4 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
7,825lb
3,549.37kg
Engine power
75hp
56kW
Gross Power Rated operating capacity
2,500lb
1,133.99kg
Bucket capacity
0.6yd³
0.4m³
◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the Bobcat S250 sits above the median for its class:
- Operating weight 7,830 lb heavier than 75% (n=334)
- Engine power 75 hp more powerful than 76% (n=335)
- Rated operating capacity 2,500 lb higher-rated than 77% (n=288)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2334 | |
| Engine Model | V3300-DI-T | |
| Gross Power | 75hp | 56kw |
| Power Measured @ | 2800rpm | |
| Displacement | 201.4cu in | 3.3L |
02 Operational Specification
| Operational Weight | 7825lb | 3549.4kg |
|---|---|---|
| Max Speed | 12mph | 19.4km/h |
| Operating Speed | 6.9mph | 11.2km/h |
03 Loader Specification
| Operating Load Rating | 2500lb | 1134kg |
|---|---|---|
| Bucket Capacity | 0.6yd3 | 0.4m3 |
04 Hydraulic Specification
| Pump Flow Capacity | 20.7gal/min | 78.4L/min |
|---|
05 Dimensions Dimensions
| Length With Bucket | 11.91ft in | 3630.17mm |
|---|---|---|
| Width Over Tires | 6ft in | 1828.8mm |
| Height To Top Of Cab | 6.74ft in | 2054.36mm |
| Wheelbase | 4.02ft in | 1225.3mm |
| Length W/O Bucket | 9.54ft in | 2907.8mm |
| Clearance At Max Lift And Dump | 8.29ft in | 2525mm |
| Reach At Max Lift And Dump | 21.6in | 548.64mm |
| Turning Radius From Center - Machine Rear | 84.2in | 2138.68mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.