The Bobcat S220 is a skid steer loader with an operating weight of 7,483 lb (3,394.24 kg), a 75 hp engine, a rated operating capacity of 2,200 lb (997.91 kg), and a tipping load of 4,561 lb (2,068.84 kg).
◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the Bobcat S220 sits above the median for its class:
Operating weight7,480 lbheavier than 69%(n=334)
Engine power75 hpmore powerful than 76%(n=335)
Rated operating capacity2,200 lbhigher-rated than 65%(n=288)
◇Scale drawingdrawn to scale · mm
Side elevationFront elevation
01 Engine Specification
Engine Model
V3300-DI-T
Gross Power
75hp
56kw
02 Operational Specification
Operational Weight
7483lb
3394.3kg
Fuel Capacity
23gal
87L
Max Speed
12mph
19.4km/h
Operating Speed
6.9mph
11.2km/h
03 Loader Specification
Operating Load Rating
2200lb
998kg
04 Hydraulic Specification
Pump Flow Capacity
20.7gal/min
78.4L/min
Relief Valve Pressure
3300psi
22752.7kPa
05 Dimensions Dimensions
A Length With Bucket
11.91ft in
3630mm
E Width Over Tires
6.01ft in
1829mm
D Ground Clearance
8.51in
216mm
C Height To Top Of Cab
6.75ft in
2055mm
Wheelbase
4.03ft in
1227mm
B Length W/O Bucket
9.55ft in
2908mm
Clearance At Max Lift And Dump
7.95ft in
2423mm
Reach At Max Lift And Dump
21.6in
548.64mm
Turning Radius From Center - Machine Rear
84.2in
2138.68mm
Data notes
†
Derived value. tipping load was not published directly in a usable form by the source. It was reconstructed from related published figures and accepted only after validating against the expected relationship between specifications for this machine class.
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.