Specification sheet Skid Steer Loader Ref bobcat-s175-skid-steer-loader
Bobcat S175
The Bobcat S175 is a skid steer loader with an operating weight of 6,220 lb (2,821.35 kg), a 46 hp engine, and a rated operating capacity of 1,750 lb (793.79 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
6,220lb
2,821.35kg
Engine power
46hp
34.4kW
Gross Power Rated operating capacity
1,750lb
793.79kg
◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the Bobcat S175 sits below the median for its class:
- Operating weight 6,220 lb lighter than 63% (n=334)
- Engine power 46 hp less powerful than 82% (n=335)
- Rated operating capacity 1,750 lb lower-rated than 61% (n=288)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Model | V2203-M-DI | |
|---|---|---|
| Gross Power | 46hp | 34.4kw |
02 Operational Specification
| Operational Weight | 6220lb | 2821.4kg |
|---|---|---|
| Fuel Capacity | 24.1gal | 91L |
| Max Speed | 11.1mph | 17.9km/h |
| Operating Speed | 7.3mph | 11.8km/h |
03 Loader Specification
| Operating Load Rating | 1750lb | 793.8kg |
|---|
04 Hydraulic Specification
| Pump Flow Capacity | 16.9gal/min | 64L/min |
|---|---|---|
| Relief Valve Pressure | 3300psi | 22752.7kPa |
05 Dimensions Dimensions
| Length With Bucket | 10.86ft in | 3310mm |
|---|---|---|
| Width Over Tires | 5.5ft in | 1676mm |
| Height To Top Of Cab | 6.36ft in | 1938mm |
| Wheelbase | 3.38ft in | 1030mm |
| Length W/O Bucket | 8.5ft in | 2588mm |
| Clearance At Max Lift And Dump | 7.58ft in | 2310mm |
| Reach At Max Lift And Dump | 29.6in | 751.84mm |
| Turning Radius From Center - Machine Rear | 78.8in | 2001.52mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.