Specification sheet Compact Track Loader Ref bobcat-mt52-multi-terrain-loader

Bobcat MT52

The Bobcat MT52 is a compact track loader with an operating weight of 5,687.93 lb (2,580 kg), a 20 hp engine, and a tipping load of 1,600.6 lb (726 kg).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
5,687.93lb
2,580kg
Engine power
20hp
15kW
Gross Power
Tipping load
1,600.6lb
726kg

◆Where it sits in its classpercentile · compact track loaders

Among 184 compact track loaders , the Bobcat MT52 sits at the compact end of its class:

  • Operating weight 5,690 lb lighter than 92% (n=182)
  • Engine power 20 hp less powerful than 100% (n=167)

Not positioned on rated operating capacity — withheld or unpublished for this machine.

◇Scale drawingdrawn to scale · mm

1246C114D2364A1839B
Side elevation
1246C904E
Front elevation

01 Engine Specification

Number Of Cylinders 3
Engine Make Kubota
Engine Model D722-E3B-BC-6
Gross Power 20hp 15kw
Power Measured @ 3600rpm
Peak Torque 32.4lb ft 43.9Nm
Torque Measured @ 2600rpm
Displacement 44cu in 0.8L
Bore 2.7in 67mm
Stroke 2.7in 68mm

02 Operational Specification

Operating Weight 5688lb 2580kg
Cooling System Fluid Capacity 1.3gal 4.7L
Fuel Capacity 7.1gal 26.5L
Engine Oil Capacity 0.9gal 3.2L
Hydraulic System Fluid Capacity 5.3gal 20L
Operating Voltage 12V
Alternator Supplied Amperage 40amps

03 Performance Specification

Breakout - Lift 1659989.1lb 7384kN
Speed - Forward Maximum 3.5mph 5.7km/h
Speed - Reverse Maximum 1.5mph 2.5km/h

04 Loader Specification

Breakout Force 16279lb 7384kg
Tipping Load 1600.6lb 726kg

05 Hydraulic Specification

Pump Type Engine driven
Pump Flow 12gal/min 45.4L/min
Relief Valve Pressure 2900psi 19994.8kPa

06 Dimensions Dimensions

Ground Clearance 4.49in 114mm
Dump Height - Maximum 18.19in 462mm
Overall Width 2.97ft in 904mm
Dump Angle 49.6degrees
Hinge Pin Height, Maximum Height 71.26in 1810mm
Length With Bucket 7.76ft in 2364mm
Length With Out Bucket 6.04ft in 1839mm
Overall Height 4.09ft in 1246mm

07 Undercarriage Dimensions

Ground Pressure 5.2psi 35.86kPa

?Questions & answersfrom this machine's data

How much does a Bobcat MT52 compact track loader weigh?
A Bobcat MT52 compact track loader has an operating weight of 5,687.9 lb (2,580 kg).
What engine does a Bobcat MT52 compact track loader have?
A Bobcat MT52 compact track loader is powered by a Kubota D722-E3B-BC-6 engine producing 20 hp (15 kW).
How much fuel does a Bobcat MT52 compact track loader hold?
A Bobcat MT52 compact track loader has a fuel capacity of 7.1 gal (26.5 L).
What is the ground clearance of a Bobcat MT52 compact track loader?
A Bobcat MT52 compact track loader has a ground clearance of 4.5 in (114 mm).
How long is a Bobcat MT52 compact track loader?
A Bobcat MT52 compact track loader has an overall length of 7.8 ft (2,364 mm) with the bucket on the ground.

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.