Bobcat E10
The Bobcat E10 is a mini excavator with an operating weight of 2,593 lb, a 10.2 hp engine, and a dig depth of 6 ft.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the Bobcat E10 sits at the compact end of its class:
- Operating weight 2,590 lb lighter than 94% (n=438)
- Engine power 10 hp less powerful than 97% (n=448)
- Dig depth 6 ft shallower-digging than 95% (n=426)
01 Boom/Stick Option (Hex) 1 Specification
| Max Reach Along Ground | 10.2ft in | 3,109mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Digging Depth | 6ft in | 1,829mm‖ — metric converted from the published imperial value |
| Boom Swing - Right | 64degrees | |
| Bucket Digging Force | 1865lb | 845.9kg‖ — metric converted from the published imperial value |
| Arm Digging Force | 1248lb | 566.1kg‖ — metric converted from the published imperial value |
| Boom Swing - Left | 67degrees | |
| Max.Dumping Height | 6ft in | 1,829mm‖ — metric converted from the published imperial value |
02 Dimensions Specification
| Height | 87in | 2,210mm‖ — metric converted from the published imperial value |
|---|---|---|
| Width | 28in | 711mm‖ — metric converted from the published imperial value |
| Overall Height With Cab | 7.25ft in | 2,210mm‖ — metric converted from the published imperial value |
| Length | 110in | 2,794mm‖ — metric converted from the published imperial value |
03 Undercarriage Specification
| Max Travel Speed | 1.7mph | 2.7km/h‖ — metric converted from the published imperial value |
|---|---|---|
| Min Travel Speed | 1.3mph | 2.1km/h‖ — metric converted from the published imperial value |
04 Engine Specification
| Fuel | Diesel | |
|---|---|---|
| Gross Power | 10.2hp | 7.61kw‖ — metric converted from the published imperial value |
| Power Measured @ | 2370rpm | |
| Emissions | Tier 4 |
05 Operational Specification
| Operating Weight | 2593lb | 1,176kg‖ — metric converted from the published imperial value |
|---|---|---|
| Fuel Capacity | 4.2gal | 16l‖ — metric converted from the published imperial value |
06 Hydraulic System Specification
| Operating Pressure | 2756psi | 19,002kpa‖ — metric converted from the published imperial value |
|---|
07 Lift Specification
| Lift Radius | 118in | 2,997mm‖ — metric converted from the published imperial value |
|---|
08 Hydraulic System Specification
| Pump Flow Capacity | 5.3gal/min | 20l/min‖ — metric converted from the published imperial value |
|---|
09 Lift Specification
| Max Lift Capacity | 527lb | 239kg‖ — metric converted from the published imperial value |
|---|
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.