Specification sheet Skid Steer Loader Ref bobcat-a770-skid-steer-loader
Bobcat A770
The Bobcat A770 is a skid steer loader with an operating weight of 9,623 lb (4,364.92 kg), a 92 hp engine, and a rated operating capacity of 700 lb (317.52 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
9,623lb
4,364.92kg
Engine power
92hp
68.7kW
Gross Power Rated operating capacity
700lb
317.52kg
◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the Bobcat A770 sits at the heavy end of its class:
- Operating weight 9,620 lb heavier than 96% (n=334)
- Engine power 92 hp more powerful than 97% (n=335)
- Rated operating capacity 700 lb lower-rated than 97% (n=288)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Emission Tier Level | Tier 4 | |
|---|---|---|
| Gross Power | 92hp | 68.7kw |
| Cooling System | Liquid | |
| Aspiration | Turbocharged | |
| Fuel Type | Turbo Diesel |
02 Operational Specification
| Lift Arm Path | Vertical | |
|---|---|---|
| Operational Weight | 9623lb | 4365kg |
| Fuel Capacity | 23.9gal | 90.5L |
| Max Speed | 7.4mph | 12km/h |
03 Loader Specification
| Loader Series | M2-Series | |
|---|---|---|
| Height To Hinge Pin | 10ft in | 3023mm |
| Operating Load Rating | 700lb | 317.6kg |
| Bucket Width | 68in | 1727mm |
04 Hydraulic Specification
| Main Pump Flow Standard | 23gal/min | 87.1L/min |
|---|---|---|
| Main Pump Flow Optional | 36.6gal/min | 138.6L/min |
| Relief Valve Pressure | 3500psi | 24131.7kPa |
05 Dimensions Dimensions
| Length With Bucket | 11.8ft in | 3596.64mm |
|---|---|---|
| Width Over Tires | 6.23ft in | 1897.38mm |
| Height To Top Of Cab | 6.78ft in | 2065.02mm |
| Wheelbase | 4.03ft in | 1226.82mm |
| Length W/O Bucket | 9.53ft in | 2903.22mm |
| Reach At Max Lift And Dump | 31.5in | 800.1mm |
| Turning Radius From Center - Inc Bucket | 85.8in | 2179.33mm |
| Turning Radius From Center - Machine Rear | 151.5in | 3848.1mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.