The Bobcat A300 is a skid steer loader with an operating weight of 8,673 lb (3,934.01 kg), a 81 hp engine, a rated operating capacity of 3,000 lb (1,360.78 kg), and a tipping load of 6,111 lb (2,771.91 kg).
◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the Bobcat A300 sits at the heavy end of its class:
Operating weight8,670 lbheavier than 90%(n=334)
Engine power81 hpmore powerful than 81%(n=335)
Rated operating capacity3,000 lbhigher-rated than 91%(n=288)
◇Scale drawingdrawn to scale · mm
Side elevationFront elevation
01 Engine Specification
Gross Power
81hp
60.5kw
Aspiration
turbocharged
02 Operational Specification
Operational Weight
8673lb
3934.1kg
Fuel Capacity
23gal
87.1L
Max Speed
6.9mph
11.2km/h
Tire Size
12-16.5
03 Loader Specification
Operating Load Rating
3000lb
1360.8kg
04 Hydraulic Specification
Pump Flow Capacity
20.7gal/min
78.4L/min
Relief Valve Pressure
3300psi
22752.7kPa
05 Dimensions Dimensions
A Length With Bucket
11.91ft in
3630mm
E Width Over Tires
6.17ft in
1880mm
D Ground Clearance
8.51in
216mm
C Height To Top Of Cab
6.75ft in
2055mm
Wheelbase
4.03ft in
1227mm
B Length W/O Bucket
9.55ft in
2908mm
Clearance At Max Lift And Dump
8.26ft in
2517mm
Reach At Max Lift And Dump
33.82in
859mm
Turning Radius From Center - Inc Bucket
84.22in
2139mm
Data notes
†
Derived value. tipping load was not published directly in a usable form by the source. It was reconstructed from related published figures and accepted only after validating against the expected relationship between specifications for this machine class.
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.