Specification sheet Skid Steer Loader Ref bobcat-863-skid-steer-loader
Bobcat 863
The Bobcat 863 is a skid steer loader with an operating weight of 7,045.98 lb (3,196 kg), and a 73 hp engine.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
7,045.98lb
3,196kg
Engine power
73hp
54.44kW
Net Power ◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the Bobcat 863 sits in the middle of its class:
- Operating weight 7,050 lb heavier than 60% (n=334)
- Engine power 73 hp more powerful than 66% (n=335)
Not positioned on rated operating capacity — withheld or unpublished for this machine.
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | Deutz | |
| Engine Model | BF4M1011F | |
| Net Power | 73hp | 54.5kw |
| Displacement | 178.2cu in | 3L |
02 Operational Specification
| Operational Weight | 7046lb | 3196kg |
|---|---|---|
| Fuel Capacity | 25gal | 94.6L |
| Max Speed | 12.5mph | 20.2km/h |
03 Loader Specification
| Tipping Load (Iso 14397) | 3800.8lb | 1724kg |
|---|---|---|
| Bucket Width | 74.1in | 1880mm |
04 Dimensions Dimensions
| Length With Bucket | 11.29ft in | 3439mm |
|---|---|---|
| Width Over Tires | 5.59ft in | 1702mm |
| Height To Top Of Cab | 6.86ft in | 2090mm |
| Wheelbase | 3.65ft in | 1110mm |
| Length W/O Bucket | 8.91ft in | 2715mm |
| Reach At Max Lift And Dump | 21.26in | 540mm |
| Height To Bucket Hinge Pin | 120984.26in | 3073m |
?Questions & answersfrom this machine's data
- How much does a Bobcat 863 skid steer weigh?
- A Bobcat 863 skid steer has an operating weight of 7,046 lb (3,196 kg).
- What engine does a Bobcat 863 skid steer have?
- A Bobcat 863 skid steer is powered by a Deutz BF4M1011F engine producing 73 hp (54.4 kW).
- How long is a Bobcat 863 skid steer?
- A Bobcat 863 skid steer has an overall length of 11.3 ft (3,439 mm) with the bucket on the ground.
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.