Specification sheet Skid Steer Loader Ref bobcat-773-skid-steer-loader
Bobcat 773
The Bobcat 773 is a skid steer loader with an operating weight of 5,809.19 lb (2,635 kg), and a 46 hp engine.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
5,809.19lb
2,635kg
Engine power
46hp
34.31kW
Net Power ◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the Bobcat 773 sits below the median for its class:
- Operating weight 5,810 lb lighter than 72% (n=334)
- Engine power 46 hp less powerful than 82% (n=335)
Not positioned on rated operating capacity — withheld or unpublished for this machine.
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | Kubota | |
| Engine Model | V2203-EB | |
| Net Power | 46hp | 34.4kw |
| Displacement | 134.3cu in | 2.2L |
02 Operational Specification
| Operational Weight | 5809.2lb | 2635kg |
|---|---|---|
| Fuel Capacity | 23.1gal | 87.1L |
| Max Speed | 7mph | 11.3km/h |
| Tire Size | 10 - 16.5 |
03 Loader Specification
| Tipping Load (Iso 14397) | 3900lb | 1769kg |
|---|---|---|
| Bucket Width | 68in | 1727mm |
04 Hydraulic Specification
| Pump Flow Capacity | 27gal/min | 102L/min |
|---|
05 Dimensions Dimensions
| Length With Bucket | 10.86ft in | 3309mm |
|---|---|---|
| Width Over Tires | 5.5ft in | 1676mm |
| Height To Top Of Cab | 6.36ft in | 1938mm |
| Wheelbase | 3.38ft in | 1030mm |
| Hinge Pin Height - Fully Raised | 118.19in | 3002mm |
?Questions & answersfrom this machine's data
- How much does a Bobcat 773 skid steer weigh?
- A Bobcat 773 skid steer has an operating weight of 5,809.2 lb (2,635 kg).
- What engine does a Bobcat 773 skid steer have?
- A Bobcat 773 skid steer is powered by a Kubota V2203-EB engine producing 46 hp (34.3 kW).
- How long is a Bobcat 773 skid steer?
- A Bobcat 773 skid steer has an overall length of 10.9 ft (3,309 mm) with the bucket on the ground.
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.