Specification sheet Skid Steer Loader Ref bobcat-753-skid-steer-loader
Bobcat 753
The Bobcat 753 is a skid steer loader with an operating weight of 4,739.94 lb (2,150 kg), and a 43.5 hp engine.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
4,739.94lb
2,150kg
Engine power
43.5hp
32.44kW
Net Power ◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the Bobcat 753 sits at the compact end of its class:
- Operating weight 4,740 lb lighter than 88% (n=334)
- Engine power 44 hp less powerful than 85% (n=335)
Not positioned on rated operating capacity — withheld or unpublished for this machine.
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | Kubota | |
| Engine Model | V2203-EB | |
| Net Power | 43.5hp | 32.5kw |
| Displacement | 134.3cu in | 2.2L |
02 Operational Specification
| Operational Weight | 4740lb | 2150kg |
|---|---|---|
| Fuel Capacity | 14.1gal | 53L |
| Max Speed | 6.6mph | 10.7km/h |
| Tire Size | 7.00-15 |
03 Loader Specification
| Tipping Load (Iso 14397) | 2599.3lb | 1179kg |
|---|---|---|
| Bucket Width | 55.1in | 1398mm |
04 Hydraulic Specification
| Pump Flow Capacity | 14.3gal/min | 54L/min |
|---|
05 Dimensions Dimensions
| Length With Bucket | 10.04ft in | 3059mm |
|---|---|---|
| Width Over Tires | 4.49ft in | 1366mm |
| Height To Top Of Cab | 6.42ft in | 1956mm |
| Wheelbase | 2.96ft in | 900mm |
| Hinge Pin Height - Fully Raised | 109.1in | 2771mm |
?Questions & answersfrom this machine's data
- How much does a Bobcat 753 skid steer weigh?
- A Bobcat 753 skid steer has an operating weight of 4,739.9 lb (2,150 kg).
- What engine does a Bobcat 753 skid steer have?
- A Bobcat 753 skid steer is powered by a Kubota V2203-EB engine producing 43.5 hp (32.4 kW).
- How long is a Bobcat 753 skid steer?
- A Bobcat 753 skid steer has an overall length of 10 ft (3,059 mm) with the bucket on the ground.
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.