The Bobcat 463 is a skid steer loader with an operating weight of 2,708 lb (1,228.33 kg), a 22.5 hp engine, a rated operating capacity of 700 lb (317.52 kg), and a tipping load of 1,405 lb (637.3 kg).
◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the Bobcat 463 sits at the compact end of its class:
Operating weight2,710 lblighter than 97%(n=334)
Engine power23 hpless powerful than 97%(n=335)
Rated operating capacity700 lblower-rated than 97%(n=288)
◇Scale drawingdrawn to scale · mm
Side elevationFront elevation
01 Engine Specification
Engine Model
D1005- E 2B-BC -3
Gross Power
22.5hp
16.8kw
02 Operational Specification
Operational Weight
2708lb
1228.4kg
Fuel Capacity
6.5gal
24.6L
Max Speed
6.5mph
10.5km/h
03 Loader Specification
Operating Load Rating
700lb
317.6kg
04 Hydraulic Specification
Pump Flow Capacity
10gal/min
37.9L/min
05 Dimensions Dimensions
A Length With Bucket
8.4ft in
2560mm
E Width Over Tires
2.96ft in
900mm
D Ground Clearance
5.52in
140mm
C Height To Top Of Cab
5.96ft in
1814mm
Wheelbase
2.37ft in
722mm
B Length W/O Bucket
6.3ft in
1918mm
Clearance At Max Lift And Dump
6.18ft in
1882mm
Reach At Max Lift And Dump
18.5in
469.9mm
Turning Radius From Center - Machine Rear
61.3in
1557.02mm
Data notes
†
Derived value. tipping load was not published directly in a usable form by the source. It was reconstructed from related published figures and accepted only after validating against the expected relationship between specifications for this machine class.
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.