Bobcat 331 Long Arm
The Bobcat 331 Long Arm is a mini excavator with an operating weight of 7,538 lb, and a 40 hp engine.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the Bobcat 331 Long Arm sits above the median for its class:
- Operating weight 7,540 lb heavier than 62% (n=438)
- Engine power 40 hp more powerful than 84% (n=448)
Not positioned on dig depth — withheld or unpublished for this machine.
01 Boom/Stick Option (Hex) 1 Specification
| Shipping Length Of Unit | 15.08ft in | 4,596mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Cutting Height | 10.08ft in | 3,072mm‖ — metric converted from the published imperial value |
| Shipping Height Of Unit | 92.85ft in | 28,301mm‖ — metric converted from the published imperial value |
| Max Reach Along Ground | 203.4ft in | 61,996mm‖ — metric converted from the published imperial value |
| Boom/Stick Option (Hex) 1 | Long Arm |
02 Dimensions Specification
| Width To Outside Of Tracks | 54.75ft in | 16,688mm‖ — metric converted from the published imperial value |
|---|---|---|
| Length Of Track On Ground | 15.08ft in | 4,596mm‖ — metric converted from the published imperial value |
| Height To Top Of Cab | 92.85ft in | 28,301mm‖ — metric converted from the published imperial value |
03 Undercarriage Specification
| Max Travel Speed | 3.2mph | 5.1km/h‖ — metric converted from the published imperial value |
|---|
04 Engine Specification
| Engine Make | 2334 | |
|---|---|---|
| Engine Model | V2203-M-DI-E28 | |
| Gross Power | 40hp | 30kw‖ — metric converted from the published imperial value |
05 Operational Specification
| Operating Weight | 7538lb | 3,419kg‖ — metric converted from the published imperial value |
|---|---|---|
| Hydraulic Pump Flow Capacity | 16.4gal/min | 62.1l/min‖ — metric converted from the published imperial value |
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.