Bobcat 329
The Bobcat 329 is a mini excavator with an operating weight of 7,098 lb, a 27.7 hp engine, and a dig depth of 10.17 ft.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the Bobcat 329 sits in the middle of its class:
- Operating weight 7,100 lb heavier than 56% (n=438)
- Engine power 28 hp more powerful than 63% (n=448)
- Dig depth 10.2 ft deeper-digging than 63% (n=426)
01 Boom/Stick Option (Hex) 1 Specification
| Shipping Length Of Unit | 15.08ft in | 4,596mm‖ — metric converted from the published imperial value |
|---|---|---|
| Shipping Height Of Unit | 7.73ft in | 2,356mm‖ — metric converted from the published imperial value |
| Max Loading Height | 10.14ft in | 3,091mm‖ — metric converted from the published imperial value |
| Max Reach Along Ground | 16ft in | 4,877mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 10.17ft in | 3,100mm‖ — metric converted from the published imperial value |
02 Dimensions Specification
| Width To Outside Of Tracks | 5.05ft in | 1,539mm‖ — metric converted from the published imperial value |
|---|---|---|
| Height To Top Of Cab | 7.73ft in | 2,356mm‖ — metric converted from the published imperial value |
03 Undercarriage Specification
| Max Travel Speed | 1.9mph | 3.1km/h‖ — metric converted from the published imperial value |
|---|
04 Engine Specification
| Engine Make | 2334 | |
|---|---|---|
| Engine Model | D1703-M-E2B | |
| Gross Power | 27.7hp | 20.7kw‖ — metric converted from the published imperial value |
| Power Measured @ | 2200rpm |
05 Operational Specification
| Operating Weight | 7098lb | 3,220kg‖ — metric converted from the published imperial value |
|---|---|---|
| Hydraulic Pump Flow Capacity | 14gal/min | 53l/min‖ — metric converted from the published imperial value |
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.