Bobcat 325
The Bobcat 325 is a mini excavator with an operating weight of 6,145 lb, and a 27.7 hp engine.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the Bobcat 325 sits in the middle of its class:
- Operating weight 6,150 lb lighter than 57% (n=438)
- Engine power 28 hp more powerful than 63% (n=448)
Not positioned on dig depth — withheld or unpublished for this machine.
01 Boom/Stick Option (Hex) 1 Specification
| Shipping Length Of Unit | 13.77ft in | 4,197mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Cutting Height | 13.31ft in | 4,057mm‖ — metric converted from the published imperial value |
| Shipping Height Of Unit | 7.74ft in | 2,359mm‖ — metric converted from the published imperial value |
| Max Loading Height | 9.12ft in | 2,780mm‖ — metric converted from the published imperial value |
| Max Reach Along Ground | 166.66ft in | 50,798mm‖ — metric converted from the published imperial value |
| Max Vertical Wall Digging Depth | 5.91ft in | 1,801mm‖ — metric converted from the published imperial value |
| Boom/Stick Option (Hex) 1 | Stick 1050mm |
02 Dimensions Specification
| Width To Outside Of Tracks | 4.58ft in | 1,396mm‖ — metric converted from the published imperial value |
|---|---|---|
| Length Of Track On Ground | 4.53ft in | 1,381mm‖ — metric converted from the published imperial value |
| Height To Top Of Cab | 7.73ft in | 2,356mm‖ — metric converted from the published imperial value |
| Tail Swing Radius | 3.82ft in | 1,164mm‖ — metric converted from the published imperial value |
| Removal Counterweight Clearance | 1.75ft in | 533mm‖ — metric converted from the published imperial value |
03 Undercarriage Specification
| Shoe Size | 12.6in | 320mm‖ — metric converted from the published imperial value |
|---|---|---|
| Track Gauge | 3.54ft in | 1,079mm‖ — metric converted from the published imperial value |
| Ground Pressure | 4.21psi | 29kpa‖ — metric converted from the published imperial value |
| Max Travel Speed | 1.9mph | 3.1km/h‖ — metric converted from the published imperial value |
04 Engine Specification
| Engine Make | 2334 | |
|---|---|---|
| Engine Model | D1703-M-E2B | |
| Gross Power | 27.7hp | 20.7kw‖ — metric converted from the published imperial value |
| Power Measured @ | 2200rpm | |
| Displacement | 97.7cu in | 1,601cm3‖ — metric converted from the published imperial value |
05 Operational Specification
| Operating Weight | 6145lb | 2,787kg‖ — metric converted from the published imperial value |
|---|---|---|
| Fuel Capacity | 14.1gal | 53.4l‖ — metric converted from the published imperial value |
| Hydraulic Pump Flow Capacity | 17.5gal/min | 66.2l/min‖ — metric converted from the published imperial value |
06 Swing Mechanism Specification
| Swing Speed | 9.2rpm |
|---|
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.