Specification sheet Mini Excavator Ref bobcat-323-mini-excavator
Bobcat 323
The Bobcat 323 is a mini excavator with an operating weight of 3,655.3 lb, a 13.3 hp engine, and a dig depth of 7.54 ft.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld → Operating weight
3,655.3lb
Engine power Gross Power
13.3hp
Dig depth
7.54ft
◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the Bobcat 323 sits below the median for its class:
- Operating weight 3,660 lb lighter than 83% (n=438)
- Engine power 13 hp less powerful than 94% (n=448)
- Dig depth 7.5 ft shallower-digging than 79% (n=426)
01 Boom/Stick Option (Hex) 1 Specification
| Shipping Length Of Unit | 12.75ft in | 3,886mm‖ — metric converted from the published imperial value |
|---|---|---|
| Shipping Height Of Unit | 7.23ft in | 2,204mm‖ — metric converted from the published imperial value |
| Max Loading Height | 11.58ft in | 3,530mm‖ — metric converted from the published imperial value |
| Max Reach Along Ground | 12.84ft in | 3,914mm‖ — metric converted from the published imperial value |
| Max Vertical Wall Digging Depth | 5.8ft in | 1,768mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 7.54ft in | 2,298mm‖ — metric converted from the published imperial value |
02 Dimensions Specification
| Width To Outside Of Tracks | 3.22ft in | 981mm‖ — metric converted from the published imperial value |
|---|---|---|
| Length Of Track On Ground | 3.66ft in | 1,116mm‖ — metric converted from the published imperial value |
| Ground Clearance | 1.36ft in | 415mm‖ — metric converted from the published imperial value |
| Tail Swing Radius | 3.51ft in | 1,070mm‖ — metric converted from the published imperial value |
03 Dimensions - Reach Boom - 5.7 M (18'8"); R2.9 (9'6") Stick Specification
04 Undercarriage Specification
| Shoe Size | 9.06in | 230mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Travel Speed | 2.37mph | 3.81km/h‖ — metric converted from the published imperial value |
05 Engine Specification
| Number Of Cylinders | 3 | |
|---|---|---|
| Engine Make | 2334 | |
| Engine Model | D722E2B | |
| Gross Power | 13.3hp | 9.92kw‖ — metric converted from the published imperial value |
| Power Measured @ | 2500rpm | |
| Displacement | 428cu in | 7,014cm3‖ — metric converted from the published imperial value |
| Bore | 4in | 102mm‖ — metric converted from the published imperial value |
| Stroke | 5in | 127mm‖ — metric converted from the published imperial value |
| Engine Model | Cat C7.1 ACERT | |
| Engine Rpm - Operation | 1650rpm | |
| Engine Rpm - Travel | 1800rpm |
06 Operational Specification
| Operating Weight | 3655.3lb | 1,658kg‖ — metric converted from the published imperial value |
|---|---|---|
| Hydraulic Pump Flow Capacity | 8gal/min | 30l/min‖ — metric converted from the published imperial value |
07 Weights Specification
| Note (1) | Long Undercarriage, HD Reach Boom, R 2.9 HD Thumb Ready Reach Stick, HD 1.38 m3 bucket and 790mm HD TG shoes, 5.4mton( 11,900lb) Counterweight. | |
|---|---|---|
| Note (2) | Long undercarriage, Reach boom, R2.9 (9'6") stick, HD 1.38 m3 (1.81 yd3) bucket and 600mm (24 in) triple grouser shoes, 4.2 mt (9,300 lb) counterweight. |
08 Hydraulic System Specification
| Maximum Pressure - Travel | 4974psi | 34,295kpa‖ — metric converted from the published imperial value |
|---|---|---|
| Maximum Pressure - Swing | 3886psi | 26,793kpa‖ — metric converted from the published imperial value |
| Main System - Maximum Flow - Total | 113gal/min | 428l/min‖ — metric converted from the published imperial value |
| Maximum Pressure - Equipment - Normal | 5075psi | 34,991kpa‖ — metric converted from the published imperial value |
09 Service Refill Capacities Specification
| Cooling System | 6.6gal | 25l‖ — metric converted from the published imperial value |
|---|---|---|
| Def Tank | 10.8gal | 40.9l‖ — metric converted from the published imperial value |
| Final Drive - Each | 1.3gal | 4.9l‖ — metric converted from the published imperial value |
| Hydraulic Tank | 30.4gal | 115l‖ — metric converted from the published imperial value |
| Hydraulic System - Including Tank | 61.8gal | 234l‖ — metric converted from the published imperial value |
| Engine Oil | 6.6gal | 25l‖ — metric converted from the published imperial value |
| Fuel Tank Capacity | 86.6gal | 328l‖ — metric converted from the published imperial value |
| Swing Drive - Each | 1.3gal | 4.9l‖ — metric converted from the published imperial value |
10 Drive Specification
| Maximum Travel Speed | 3.5mph | 5.6km/h‖ — metric converted from the published imperial value |
|---|---|---|
| Maximum Drawbar Pull | 45614lb | 20,690kg‖ — metric converted from the published imperial value |
| Maximum Gradeability | 35 degrees--70% |
11 Swing Specification
| Swing Speed | 11.3rpm | |
|---|---|---|
| Maximum Swing Torque | 54440lb ft |
12 Working Ranges - Reach Boom - 5.7 M (18'8"); R2.9 (9'6") Stick Specification
| Maximum Digging Depth | 22.1ft in | 6,736mm‖ — metric converted from the published imperial value |
|---|---|---|
| Maximum Reach - Ground Level | 32.4ft in | 9,876mm‖ — metric converted from the published imperial value |
| Maximum Cutting Height | 31ft in | 9,449mm‖ — metric converted from the published imperial value |
| Maximum Loading Height | 21.3ft in | 6,492mm‖ — metric converted from the published imperial value |
| Minimum Loading Height | 7.1ft in | 2,164mm‖ — metric converted from the published imperial value |
| Maximum Depth Cut For 2440 Mm (8'0") Level Bottom | 21.5ft in | 6,553mm‖ — metric converted from the published imperial value |
| Maximum Vertical Wall Digging Depth | 18.8ft in | 5,730mm‖ — metric converted from the published imperial value |
Data notes
‖
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.