Bobcat 320
The Bobcat 320 is a mini excavator with an operating weight of 3,483.4 lb, a 15.7 hp engine, and a dig depth of 7.21 ft.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the Bobcat 320 sits at the compact end of its class:
- Operating weight 3,480 lb lighter than 87% (n=438)
- Engine power 16 hp less powerful than 80% (n=448)
- Dig depth 7.2 ft shallower-digging than 85% (n=426)
01 Boom/Stick Option (Hex) 1 Specification
| Max Cutting Height | 5.17ft in | 1,576mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Loading Height | 8.16ft in | 2,487mm‖ — metric converted from the published imperial value |
| Max Reach Along Ground | 12.53ft in | 3,819mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 7.21ft in | 2,198mm‖ — metric converted from the published imperial value |
| Boom/Stick Option (Hex) 1 | standard |
02 Dimensions Specification
| Width To Outside Of Tracks | 3.22ft in | 981mm‖ — metric converted from the published imperial value |
|---|---|---|
| Length Of Track On Ground | 3.66ft in | 1,116mm‖ — metric converted from the published imperial value |
| Ground Clearance | 0.59ft in | 180mm‖ — metric converted from the published imperial value |
| Tail Swing Radius | 3.51ft in | 1,070mm‖ — metric converted from the published imperial value |
03 Undercarriage Specification
| Shoe Size | 9.06in | 230mm‖ — metric converted from the published imperial value |
|---|
04 Engine Specification
| Engine Make | 2334 | |
|---|---|---|
| Gross Power | 15.7hp | 11.7kw‖ — metric converted from the published imperial value |
05 Operational Specification
| Operating Weight | 3483.4lb | 1,580kg‖ — metric converted from the published imperial value |
|---|---|---|
| Hydraulic System Relief Valve Pressure | 2494.7psi | 17,200kpa‖ — metric converted from the published imperial value |
| Hydraulic Pump Flow Capacity | 8gal/min | 30l/min‖ — metric converted from the published imperial value |
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.