Specification sheet Wheel Loader Ref bell-l2306c-plus-ii-wheel-loader

Bell L2306C Plus II

The Bell L2306C Plus II is a wheel loader with an operating weight of 49,317.42 lb (22,370 kg), a 260.2 hp engine, and a 4.98 yd³ (3.8 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
49,317.42lb
22,370kg
Engine power
260.2hp
194kW
Net Power
Bucket capacity
4.98yd³
3.8m³

Where it sits in its classpercentile · medium wheel loaders

Among 198 medium wheel loaders (45,000–90,000 lb), the Bell L2306C Plus II sits below the median for its class:

  • Operating weight 49,320 lb lighter than 78% (n=198)
  • Engine power 260 hp less powerful than 71% (n=190)
  • Bucket capacity 5 yd³ smaller-bucket than 81% (n=174)

Scale drawingdrawn to scale · mm

3589B549C8576A
Side elevation

01 Engine Specification

Engine Make 2240
Engine Model e
Net Power 260.2hp 194kw

02 Operational Specification

Operating Weight 49317.5lb 22370kg
Fuel Capacity 81.9gal 310L
Static Tipping Weight 36896.6lb 16736kg
Tire Size 26.5R25

03 Transmission Specification

Transmission Type ZF 4WG260

04 Bucket Dimensions

Dump Clearance At Max Raise 10.8ft in 3289mm
Bucket Capacity - Heaped 4.98yd3 3.8m3
Breakout Force 52155.68lb 232kN

05 Dimensions Dimensions

Ground Clearance 1.81ft in 549mm
Length With Bucket On Ground 28.14ft in 8576mm
Height To Top Of Cab 11.78ft in 3589mm
Wheelbase 11.32ft in 3450mm
Reach At Max Lift And Dump 3.6ft in 1097mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.